PartsTable
Technical Data Sheet
PartsTable / COMPONENT / U190
U190 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include length: 0.450 FEET NOMINAL FT, material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 90.00 MILLIMETERS NOMINAL MM, overall_width: 30.00 MILLIMETERS NOMINAL MM, alignment_type: SELF-ALIGNING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-5136, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
U190
NSN: 3110-00-156-5136
FSC: 3110
CAGE: 43991 — FAG BEARINGS CORPORATION (USA)
SPECIFICATIONS
length0.450 FEET NOMINAL FT
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter90.00 MILLIMETERS NOMINAL MM
overall_width30.00 MILLIMETERS NOMINAL MM
alignment_typeSELF-ALIGNING
load_directionANGULAR
surface_finishGROUND
style_designatorNON-SEPARABLE
end_item_identificationUMS12 MAGNUM SPIKE STRIP
self-alignment_locationINTERNAL
overall_outside_diameter160.00 MILLIMETERS NOMINAL MM
NSN3110-00-156-5136
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: U190 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
LOAD DIRECTION: ANGULAR
•
BORE SHAPE: STRAIGHT
•
STYLE DESIGNATOR: NON-SEPARABLE
•
ALIGNMENT TYPE: SELF-ALIGNING
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
LOAD DIRECTIONANGULAR
BORE SHAPESTRAIGHT
BORE SHAPESTRAIGHT
STYLE DESIGNATORNON-SEPARABLE
ALIGNMENT TYPESELF-ALIGNING
STYLE DESIGNATORNON-SEPARABLE
MATERIALSTEEL OVERALL
NONDEFINITIVE SPEC/STD DATA123 TYPE AND 00 GRADE
STANDARD TOLERANCE DESIGNATIONABEC NO.1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
2470070-1Interchangeable
interchangeable cross-reference
interchangeable
700689Interchangeable
interchangeable cross-reference
interchangeable
SS1Interchangeable
interchangeable cross-reference
interchangeable
U190Interchangeable
interchangeable cross-reference
interchangeable
1218Interchangeable
Same NIIN cross-reference
interchangeable
FFB171Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy U190?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is U190?
U190 is a BEARING,BALL,ANNULAR.
What parts can replace U190?
There are 7 known substitutes for U190: 2470070-1, 700689, SS1 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for U190?
U190 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-5136. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — U190

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026