PartsTable
Technical Data Sheet
PartsTable / COMPONENT / U1314TM
U1314TM ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,CYLINDRICAL is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 70.0 MILLIMETERS NOMINAL MM, overall_width: 35.0 MILLIMETERS NOMINAL MM, surface_finish: GROUND, locating_feature: NONLOCATING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-7350, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
U1314TM
NSN: 3110-00-100-7350
FSC: 3110
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter70.0 MILLIMETERS NOMINAL MM
overall_width35.0 MILLIMETERS NOMINAL MM
surface_finishGROUND
locating_featureNONLOCATING
style_designatorSINGLE ROW, NON-LOCATING, TWO LIP INNER RING, CYLINDRICAL OUTER RING WITH TWO ROLLER RETAINMENT RINGS ON OUTER, NON-SEPARABLE
overall_outside_diameter150.0 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
standard_tolerance_designationRBEC NO.1
NSN3110-00-100-7350
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: U1314TM · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: SINGLE ROW, NON-LOCATING, TWO LIP INNER RING, CYLINDRICAL OUTER RING WITH TWO ROLLER RETAINMENT RINGS ON OUTER, NON-SEPARABLE
•
MATERIAL: STEEL OVERALL
•
BORE SHAPE: STRAIGHT
•
OVERALL OUTSIDE DIAMETER: 150.0 MILLIMETERS NOMINAL MM
•
BORE DIAMETER: 70.0 MILLIMETERS NOMINAL MM
•
LOCATING FEATURE: NONLOCATING
TECHNICAL CHARACTERISTICS (FLIS)
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
STYLE DESIGNATORSINGLE ROW, NON-LOCATING, TWO LIP INNER RING, CYLINDRICAL OUTER RING WITH TWO ROLLER RETAINMENT RINGS ON OUTER, NON-SEPARABLE
MATERIALSTEEL OVERALL
BORE SHAPESTRAIGHT
OVERALL OUTSIDE DIAMETER150.0 MILLIMETERS NOMINAL MM
BORE DIAMETER70.0 MILLIMETERS NOMINAL MM
LOCATING FEATURENONLOCATING
OVERALL WIDTH35.0 MILLIMETERS NOMINAL MM
STANDARD TOLERANCE DESIGNATIONRBEC NO.1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
12910Interchangeable
interchangeable cross-reference
interchangeable
8A91001Interchangeable
interchangeable cross-reference
interchangeable
30023Interchangeable
interchangeable cross-reference
interchangeable
25A226676-21-11Interchangeable
interchangeable cross-reference
interchangeable
CS9725Interchangeable
interchangeable cross-reference
interchangeable
70767-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy U1314TM?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is U1314TM?
U1314TM is a BEARING,ROLLER,CYLINDRICAL.
What parts can replace U1314TM?
There are 12 known substitutes for U1314TM: 12910, 8A91001, 30023 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for U1314TM?
U1314TM is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-7350. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — U1314TM

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026