PartsTable
Technical Data Sheet
Download PDF

U0410195 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

U0410195: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLAT COUNTERSUNK, head_height: 0.251 INCHES NOMINAL IN, thread_class: 3A A, head_diameter: 0.806 INCHES MINIMUM AND 0.872 INCHES MAXIMUM IN, thread_length: 1.25 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-617-1037, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
U0410195
NSN: 5305-01-617-1037
FSC: 5305 — Screws
CAGE: F9980 — JIGE INTERNATIONAL (FRA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleFLAT COUNTERSUNK
head_height0.251 INCHES NOMINAL IN
thread_class3A A
head_diameter0.806 INCHES MINIMUM AND 0.872 INCHES MAXIMUM IN
thread_length1.25 INCHES NOMINAL IN
fastener_length1.25 INCHES NOMINAL IN
hardness_rating39.0 ROCKWELL C MINIMUM AND 44.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentOXIDE OVERALL
width_across_flats0.312 INCHES MINIMUM AND 0.316 INCHES MAXIMUM IN
internal_drive_styleHEXAGON
NSN5305-01-617-1037
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: U0410195 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.312 INCHES MINIMUM AND 0.316 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.251 INCHES NOMINAL IN
•
FASTENER LENGTH: 1.25 INCHES NOMINAL IN
•
THREAD LENGTH: 1.25 INCHES NOMINAL IN
•
HARDNESS RATING: 39.0 ROCKWELL C MINIMUM AND 44.0 ROCKWELL C MAXIMUM OVERALL
•
NOMINAL THREAD DIAMETER: 0.500 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.312 INCHES MINIMUM AND 0.316 INCHES MAXIMUM IN
HEAD HEIGHT0.251 INCHES NOMINAL IN
FASTENER LENGTH1.25 INCHES NOMINAL IN
THREAD LENGTH1.25 INCHES NOMINAL IN
HARDNESS RATING39.0 ROCKWELL C MINIMUM AND 44.0 ROCKWELL C MAXIMUM OVERALL
NOMINAL THREAD DIAMETER0.500 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
COLORBLACK OVERALL
SURFACE TREATMENTOXIDE OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
4007662Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
0410195Reference document
Same NSN cross-reference
Reference document — Secondary reference
Y00014942Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy U0410195?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is U0410195?
U0410195 is a SCREW,CAP,SOCKET HEAD.
What parts can replace U0410195?
There are 3 known substitutes for U0410195: 4007662, 0410195, Y00014942. Substitute compatibility should be verified for your specific system.
What is the NSN for U0410195?
U0410195 is cataloged in the U.S. Government catalog under NSN 5305-01-617-1037. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — U0410195

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.