PartsTable
Technical Data Sheet
PartsTable / COMPONENT / TYPE6 1-2
TYPE6 1-2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The REAMER,MACHINE is a the manufacturer industrial component. Key specifications include guide: NOT INCLUDED, diameter: 0.203 INCHES NOMINAL IN, material: STEEL LOCATION NOT OTHERWISE SPECIFIED, flute_type: INTEGRAL, shank_type: MORSE TAPER, reamer_type: FLUTED CHUCKING. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-200-8503, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TYPE6 1-2
NSN: 5340-00-200-8503
FSC: 5340
CAGE: 85480 — BRADY UNITED STATES (USA)
SPECIFICATIONS
guideNOT INCLUDED
diameter0.203 INCHES NOMINAL IN
materialSTEEL LOCATION NOT OTHERWISE SPECIFIED
flute_typeINTEGRAL
shank_typeMORSE TAPER
reamer_typeFLUTED CHUCKING
flute_designSPIRAL
flute_length3.000 INCHES NOMINAL IN
overall_width0.500 INCHES NOMINAL IN
flute_quantity10
overall_length11.500 INCHES NOMINAL IN
helix_directionRIGHT-HAND
NSN5340-00-200-8503
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: TYPE6 1-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP INSIDE DIAMETER: 0.500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL: PLASTIC BAND
•
MATERIAL THICKNESS: 0.060 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.592 INCHES NOMINAL IN
•
DIAMETER: 0.203 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
LOOP INSIDE DIAMETER0.500 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
MATERIALPLASTIC BAND
MATERIAL THICKNESS0.060 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.592 INCHES NOMINAL IN
MATERIAL THICKNESS0.060 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
DIAMETER0.203 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.795 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
710876-008Upgraded Successor
successor cross-reference
successor
PP7Upgraded Successor
successor cross-reference
successor
MS25281R8Upgraded Successor
successor cross-reference
successor
TYPE612Interchangeable
interchangeable cross-reference
interchangeable
GGGR180TYPE10CLASS1STYLEBGRADEAInterchangeable
interchangeable cross-reference
interchangeable
8599093-008Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy TYPE6 1-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TYPE6 1-2?
TYPE6 1-2 is a REAMER,MACHINE.
What parts can replace TYPE6 1-2?
There are 10 known substitutes for TYPE6 1-2: 710876-008, PP7, MS25281R8 and 7 more. Substitute compatibility should be verified for your specific system.
Is TYPE6 1-2 still available?
TYPE6 1-2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TYPE6 1-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026