PartsTable
Technical Data Sheet
PartsTable / COMPONENT / TYPE1 3-32X1-2CV
TYPE1 3-32X1-2CV ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,GROOVED,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 6150 OVERALL, overall_length: 0.500 INCHES NOMINAL IN, style_designator: FULL LENGTH GROOVE, surface_treatment: ZINC OVERALL, pin_large_end_diameter: 0.100 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN, pin_small_end_diameter: 0.0928 INCHES MINIMUM AND 0.0938 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-271-6925, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TYPE1 3-32X1-2CV
NSN: 5315-00-271-6925
FSC: 5315
CAGE: 73957 — GROOV-PIN CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 6150 OVERALL
overall_length0.500 INCHES NOMINAL IN
style_designatorFULL LENGTH GROOVE
surface_treatmentZINC OVERALL
pin_large_end_diameter0.100 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
pin_small_end_diameter0.0928 INCHES MINIMUM AND 0.0938 INCHES MAXIMUM IN
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5315-00-271-6925
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: TYPE1 3-32X1-2CV · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
PIN SMALL END DIAMETER: 0.0928 INCHES MINIMUM AND 0.0938 INCHES MAXIMUM IN
•
PIN LARGE END DIAMETER: 0.100 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: FULL LENGTH GROOVE
•
MATERIAL: STEEL COMP 6150 OVERALL
•
SURFACE TREATMENT: ZINC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
PIN SMALL END DIAMETER0.0928 INCHES MINIMUM AND 0.0938 INCHES MAXIMUM IN
OVERALL LENGTH0.500 INCHES NOMINAL IN
PIN LARGE END DIAMETER0.100 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
STYLE DESIGNATORFULL LENGTH GROOVE
MATERIALSTEEL COMP 6150 OVERALL
SURFACE TREATMENTZINC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
3686Interchangeable
interchangeable cross-reference
interchangeable
10383838Interchangeable
interchangeable cross-reference
interchangeable
1251Interchangeable
interchangeable cross-reference
interchangeable
22434Interchangeable
interchangeable cross-reference
interchangeable
8178521Interchangeable
interchangeable cross-reference
interchangeable
26509-000Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy TYPE1 3-32X1-2CV?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TYPE1 3-32X1-2CV?
TYPE1 3-32X1-2CV is a PIN,GROOVED,HEADLESS.
What parts can replace TYPE1 3-32X1-2CV?
There are 12 known substitutes for TYPE1 3-32X1-2CV: 3686, 10383838, 1251 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for TYPE1 3-32X1-2CV?
TYPE1 3-32X1-2CV is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-271-6925. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TYPE1 3-32X1-2CV

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026