PartsTable
Technical Data Sheet
PartsTable / MRO / TYPE 4
TYPE 4 ✓ Verified by PartsTable
Ricoh · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

TONER,DIRECT ELECTROSTATIC PROCE. Key specifications include phase: SINGLE, length: 0.531 INCHES NOMINAL IN, leg_type: EXTENSION, material: STEEL COMP 1112 OVERALL, foot_type: RUBBER TIPPED, head_type: PAN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-044-3230, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ TYPE 4
NSN: 5315-00-044-3230
FSC: 5315
CAGE: 73957 — GROOV-PIN CORP (USA)
SPECIFICATIONS
phaseSINGLE
length0.531 INCHES NOMINAL IN
leg_typeEXTENSION
materialSTEEL COMP 1112 OVERALL
quantity3
foot_typeRUBBER TIPPED
head_typePAN
head_designDETACHABLE
usage_designOIL AND FUEL ANALYSIS ARMY
carrying_caseNOT PROVIDED
holding_strapNOT INCLUDED
physical_formPOWDER
NSN5315-00-044-3230
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: TYPE 4 · Ricoh ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERMEDIATE DIAMETER: 0.132 INCHES MINIMUM AND 0.136 INCHES MAXIMUM IN
•
FIRST END OUTER RADIUS: 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
•
FIRST END LOCATION: BOTH ENDS
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD ALL MATERIAL RESPONSES OVERALL
•
PIN SMALL END DIAMETER: 0.123 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN
•
PIN LARGE END DIAMETER: 0.090 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
INTERMEDIATE DIAMETER0.132 INCHES MINIMUM AND 0.136 INCHES MAXIMUM IN
FIRST END OUTER RADIUS0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
OVERALL LENGTH0.400 INCHES NOMINAL IN
FIRST END LOCATIONBOTH ENDS
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD ALL MATERIAL RESPONSES OVERALL
PIN SMALL END DIAMETER0.123 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN
PIN LARGE END DIAMETER0.090 INCHES NOMINAL IN
MATERIALSTEEL COMP 1112 OR STEEL COMP 1113 OVERALL
SURFACE TREATMENTZINC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
TYPE 4Interchangeable
interchangeable cross-reference
interchangeable
DE-B-4497Interchangeable
interchangeable cross-reference
interchangeable
4-1-8-3-8Interchangeable
interchangeable cross-reference
interchangeable
9732Interchangeable
interchangeable cross-reference
interchangeable
BP114084Interchangeable
interchangeable cross-reference
interchangeable
6278Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy TYPE 4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TYPE 4?
TYPE 4 is a TONER,DIRECT ELECTROSTATIC PROCE manufactured by Ricoh. It is classified as a MRO (MRO_GENERAL).
What parts can replace TYPE 4?
There are 21 known substitutes for TYPE 4: TYPE 4, DE-B-4497, 4-1-8-3-8 and 18 more. Substitute compatibility should be verified for your specific system.
Is TYPE 4 still available?
TYPE 4 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TYPE 4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026