PartsTable
Technical Data Sheet
PartsTable / COMPONENT / TYPE 2 7/16-2
TYPE 2 7/16-2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The TYPE 2 7/16-2 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-993-8495, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TYPE 2 7/16-2
NSN: 5340-00-993-8495
FSC: 5340
CAGE: 85480 — BRADY UNITED STATES (USA)
SPECIFICATIONS
Part NumberTYPE 2 7/16-2
NSN5340-00-993-8495
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: TYPE 2 7/16-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC POLYAMIDE NYLON BAND
•
STYLE DESIGNATOR: SINGLE LOOP
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.431 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
LOOP INSIDE DIAMETER: 0.437 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.603 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC POLYAMIDE NYLON BAND
STYLE DESIGNATORSINGLE LOOP
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.431 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
OVERALL WIDTH0.281 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.437 INCHES NOMINAL IN
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.603 INCHES NOMINAL IN
DIAMETER0.128 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
7162Upgraded Successor
successor cross-reference
successor
361621Interchangeable
interchangeable cross-reference
interchangeable
190204Interchangeable
interchangeable cross-reference
interchangeable
1222021P4Interchangeable
interchangeable cross-reference
interchangeable
B1RA252AInterchangeable
interchangeable cross-reference
interchangeable
SCD552Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy TYPE 2 7/16-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TYPE 2 7/16-2?
TYPE 2 7/16-2 is a TYPE 2 7/16-2.
What parts can replace TYPE 2 7/16-2?
There are 19 known substitutes for TYPE 2 7/16-2: 7162, 361621, 190204 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for TYPE 2 7/16-2?
TYPE 2 7/16-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-993-8495. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TYPE 2 7/16-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026