TX1026V3-24 — SCREW,CLOSE TOLERANCE

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

TX1026V3-24: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY UNS R56400 OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN, head_diameter: 0.345 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-418-9140, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

TX1026V3-24

NSN: 5305-01-418-9140
FSC: 5305 — Screws
CAGE: 56878 — SPS TECHNOLOGIES, LLC DBA PB FASTENERS (USA)

SPECIFICATIONS

material	TITANIUM ALLOY UNS R56400 OVERALL
head_style	FLAT COUNTERSUNK
grip_length	1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM IN
thread_class	3A A
grip_diameter	0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
head_diameter	0.345 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN
thread_length	0.345 INCHES NOMINAL IN
surface_finish	32.0 MICROINCHES GRIP
fastener_length	1.830 INCHES MINIMUM AND 1.860 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
countersink_angle	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
internal_drive_style	TORX
NSN	5305-01-418-9140

COMPONENT DIAGRAM

KEY FEATURES

•

SURFACE FINISH: 32.0 MICROINCHES THREADS

•

FASTENER LENGTH: 1.830 INCHES MINIMUM AND 1.860 INCHES MAXIMUM IN

•

THREAD LENGTH: 0.345 INCHES NOMINAL IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: NAS 4004 ASSN STD SINGLE MATERIAL RESPONSE OVERALL

•

SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN

•

NOMINAL THREAD DIAMETER: 0.190 INCHES IN

TECHNICAL CHARACTERISTICS

SURFACE FINISH	32.0 MICROINCHES THREADS
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
FASTENER LENGTH	1.830 INCHES MINIMUM AND 1.860 INCHES MAXIMUM IN
THREAD LENGTH	0.345 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION	NAS 4004 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SPLINE MAJOR DIAMETER	0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER	0.190 INCHES IN
HEAD STYLE	FLAT COUNTERSUNK
THREAD DIRECTION	RIGHT-HAND

OTHER ITEMS IN FSC 5305 — Screws

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753

SUBSTITUTES & CROSS-REFERENCES 2

3M1169V3-24Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

TX1026V3-24AReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy TX1026V3-24?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is TX1026V3-24?

TX1026V3-24 is a SCREW,CLOSE TOLERANCE.

What parts can replace TX1026V3-24?

There are 2 known substitutes for TX1026V3-24: 3M1169V3-24, TX1026V3-24A. Substitute compatibility should be verified for your specific system.

What is the NSN for TX1026V3-24?

TX1026V3-24 is cataloged in the U.S. Government catalog under NSN 5305-01-418-9140. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

TX1026V3-24 — SCREW,CLOSE TOLERANCE

Request a Quote — TX1026V3-24