PartsTable
Technical Data Sheet
Download PDF

TX1024D3-2-5 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

TX1024D3-2-5: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL COMP XM-13 OVERALL, head_style: FLAT COUNTERSUNK UNDERCUT, grip_length: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN, head_height: 0.049 INCHES NOMINAL IN, thread_class: 3A A, grip_diameter: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-417-3841, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TX1024D3-2-5
NSN: 5305-01-417-3841
FSC: 5305 — Screws
CAGE: 06725 — SPS TECHNOLOGIES, LLC DBA AIR INDUSTRIES COMPANY DIV AIR INDUSTRIES COMPANY (USA)
SPECIFICATIONS
materialSTEEL COMP XM-13 OVERALL
head_styleFLAT COUNTERSUNK UNDERCUT
grip_length0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
head_height0.049 INCHES NOMINAL IN
thread_class3A A
grip_diameter0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
head_diameter0.265 INCHES MINIMUM AND 0.293 INCHES MAXIMUM IN
thread_length0.313 INCHES NOMINAL IN
fastener_length0.423 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
surface_treatmentPASSIVATE OVERALL
NSN5305-01-417-3841
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: TX1024D3-2-5 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.049 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.423 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.313 INCHES NOMINAL IN
•
SINGLE SHEAR STRENGTH: ERR-060
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK UNDERCUT
•
THREAD DIRECTION: RIGHT-HAND
•
GRIP LENGTH: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.049 INCHES NOMINAL IN
FASTENER LENGTH0.423 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
THREAD LENGTH0.313 INCHES NOMINAL IN
SINGLE SHEAR STRENGTHERR-060
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT COUNTERSUNK UNDERCUT
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
GRIP DIAMETER0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 2
3M1262D3-2-5Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
11853D3-2-5 1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy TX1024D3-2-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TX1024D3-2-5?
TX1024D3-2-5 is a SCREW,CLOSE TOLERANCE.
What parts can replace TX1024D3-2-5?
There are 2 known substitutes for TX1024D3-2-5: 3M1262D3-2-5, 11853D3-2-5 1. Substitute compatibility should be verified for your specific system.
What is the NSN for TX1024D3-2-5?
TX1024D3-2-5 is cataloged in the U.S. Government catalog under NSN 5305-01-417-3841. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TX1024D3-2-5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.