PartsTable
Technical Data Sheet
PartsTable / COMPONENT / TVM-2-54-2-4
TVM-2-54-2-4 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER SLEEVE,SEAL is a the manufacturer industrial component. Key specifications include general_characteristics_item_description: REATINER SLEEVE,SEAL C/O OF THE FOLLOWING DIM. ON DWG CAGE 19207 P/N 12286960; OD IS 1.692 AND ID IS 1.574;MATL IS CRES.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-074-4951, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TVM-2-54-2-4
NSN: 5330-01-074-4951
FSC: 5330
CAGE: 09257 — TRELLEBORG SEALING SOLUTIONS US, INC. (USA)
SPECIFICATIONS
general_characteristics_item_descriptionREATINER SLEEVE,SEAL C/O OF THE FOLLOWING DIM. ON DWG CAGE 19207 P/N 12286960; OD IS 1.692 AND ID IS 1.574;MATL IS CRES
NSN5330-01-074-4951
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: TVM-2-54-2-4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GENERAL CHARACTERISTICS ITEM DESCRIPTION: REATINER SLEEVE,SEAL C/O OF THE FOLLOWING DIM. ON DWG CAGE 19207 P/N 12286960; OD IS 1.692 AND ID IS 1.574;MATL IS CRES
TECHNICAL CHARACTERISTICS (FLIS)
GENERAL CHARACTERISTICS ITEM DESCRIPTIONREATINER SLEEVE,SEAL C/O OF THE FOLLOWING DIM. ON DWG CAGE 19207 P/N 12286960; OD IS 1.692 AND ID IS 1.574;MATL IS CRES
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
1008101M1Interchangeable
interchangeable cross-reference
interchangeable
M2498Interchangeable
interchangeable cross-reference
interchangeable
33077Interchangeable
interchangeable cross-reference
interchangeable
4055565-8Interchangeable
interchangeable cross-reference
interchangeable
13R9Interchangeable
interchangeable cross-reference
interchangeable
33-077-207Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy TVM-2-54-2-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TVM-2-54-2-4?
TVM-2-54-2-4 is a RETAINER SLEEVE,SEAL.
What parts can replace TVM-2-54-2-4?
There are 10 known substitutes for TVM-2-54-2-4: 1008101M1, M2498, 33077 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for TVM-2-54-2-4?
TVM-2-54-2-4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-074-4951. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TVM-2-54-2-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026