PartsTable
Technical Data Sheet
Download PDF

TS33-014 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

TS33-014: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL OVERALL, outside_diameter: 0.608 INCHES MINIMUM AND 0.634 INCHES MAXIMUM IN, style_designator: CIRCULAR, aperture_diameter: 0.484 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN, cross-sectional_thickness: 0.063 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-252-8888, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TS33-014
NSN: 5330-00-252-8888
FSC: 5330 — Packing and Gasket Materials
CAGE: 91265 — PARKER-HANNIFIN CORPORATION DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
hardness_rating90.0 SHORE DUROMETER A NOMINAL OVERALL
outside_diameter0.608 INCHES MINIMUM AND 0.634 INCHES MAXIMUM IN
style_designatorCIRCULAR
aperture_diameter0.484 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN
cross-sectional_thickness0.063 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-252-8888
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: TS33-014 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.063 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 0.608 INCHES MINIMUM AND 0.634 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 0.484 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.063 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL OVERALL
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER0.608 INCHES MINIMUM AND 0.634 INCHES MAXIMUM IN
APERTURE DIAMETER0.484 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 6
10050794Reference document
Same NSN cross-reference
Reference document — Informative reference only
691-10014Reference document
Same NSN cross-reference
Reference document — Secondary reference
014-7509Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
691-00014-0Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
T533-014Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
151900Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy TS33-014?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TS33-014?
TS33-014 is a GASKET.
What parts can replace TS33-014?
There are 6 known substitutes for TS33-014: 10050794, 691-10014, 014-7509 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for TS33-014?
TS33-014 is cataloged in the U.S. Government catalog under NSN 5330-00-252-8888. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TS33-014

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.