PartsTable
Technical Data Sheet
Download PDF

TS1000-29 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

TS1000-29: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OR STEEL COMP 410 OR STEEL COMP 1008 SHIELD, bore_shape: STRAIGHT, bore_diameter: 0.1875 INCHES NOMINAL IN, overall_width: 0.1960 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-505-1696, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TS1000-29
NSN: 3110-00-505-1696
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 50294 — NEW HAMPSHIRE BALL BEARINGS INC DIV PRECISION DIVISION (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL COMP 410 OR STEEL COMP 1008 SHIELD
bore_shapeSTRAIGHT
bore_diameter0.1875 INCHES NOMINAL IN
overall_width0.1960 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
special_featuresAMOUNT OF LUBE 30 TO 50 PCT FULL
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
lubrication_materialGREASE
overall_outside_diameter0.5000 INCHES NOMINAL IN
internal_fit-up_designationSTANDARD
NSN3110-00-505-1696
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: TS1000-29 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
LUBRICATION MATERIAL: GREASE
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 2
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 0.5000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIALGREASE
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
SHIELD QUANTITY2
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH0.1960 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.5000 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
SUBSTITUTES & CROSS-REFERENCES 4
R3ZZReference document
Same NSN cross-reference
Reference document — Secondary reference
R31PPK15Reference document
Same NSN cross-reference
Reference document — Secondary reference
77R3XR1CJ2Reference document
Same NSN cross-reference
Reference document — Secondary reference
33PP5FS160Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy TS1000-29?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TS1000-29?
TS1000-29 is a BEARING,BALL,ANNULAR.
What parts can replace TS1000-29?
There are 4 known substitutes for TS1000-29: R3ZZ, R31PPK15, 77R3XR1CJ2 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for TS1000-29?
TS1000-29 is cataloged in the U.S. Government catalog under NSN 3110-00-505-1696. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TS1000-29