PartsTable
Technical Data Sheet
Download PDF

TR3347-3 — STRIKE,CATCH

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

TR3347-3: STRIKE,CATCH.

The STRIKE,CATCH is a the manufacturer industrial component. Key specifications include height: 0.500 INCHES NOMINAL IN, material: UNABLE TO DECODE, tongue_width: 0.625 INCHES NOMINAL IN, overall_width: 0.625 INCHES NOMINAL IN, mounting_facility: UNTHREADED HOLE(S), material_thickness: 0.083 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-051-9827, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TR3347-3
NSN: 5340-01-051-9827
FSC: 5340 — Hardware, Commercial
CAGE: 92878 — HDT EXPEDITIONARY SYSTEMS INC (USA)
SPECIFICATIONS
height0.500 INCHES NOMINAL IN
materialUNABLE TO DECODE
tongue_width0.625 INCHES NOMINAL IN
overall_width0.625 INCHES NOMINAL IN
mounting_facilityUNTHREADED HOLE(S)
material_thickness0.083 INCHES NOMINAL IN
first_surface_hole_size0.125 INCHES MINIMUM AND 0.157 INCHES MAXIMUM IN
first_surface_hole_quantity2
NSN5340-01-051-9827
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: TR3347-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TONGUE WIDTH: 0.625 INCHES NOMINAL IN
•
FIRST SURFACE HOLE SIZE: 0.125 INCHES MINIMUM AND 0.157 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.083 INCHES NOMINAL IN
•
HEIGHT: 0.500 INCHES NOMINAL IN
•
MOUNTING FACILITY: UNTHREADED HOLE(S)
•
MATERIAL: UNABLE TO DECODE
•
FIRST SURFACE HOLE QUANTITY: 2
TECHNICAL CHARACTERISTICS
TONGUE WIDTH0.625 INCHES NOMINAL IN
OVERALL WIDTH0.625 INCHES NOMINAL IN
FIRST SURFACE HOLE SIZE0.125 INCHES MINIMUM AND 0.157 INCHES MAXIMUM IN
MATERIAL THICKNESS0.083 INCHES NOMINAL IN
HEIGHT0.500 INCHES NOMINAL IN
MOUNTING FACILITYUNTHREADED HOLE(S)
MATERIALUNABLE TO DECODE
FIRST SURFACE HOLE QUANTITY2
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
SC-D-20650-14Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy TR3347-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TR3347-3?
TR3347-3 is a STRIKE,CATCH.
What parts can replace TR3347-3?
There is 1 known substitute for TR3347-3: SC-D-20650-14. Substitute compatibility should be verified for your specific system.
What is the NSN for TR3347-3?
TR3347-3 is cataloged in the U.S. Government catalog under NSN 5340-01-051-9827. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TR3347-3