PartsTable
Technical Data Sheet
PartsTable / COMPONENT / TR-86
TR-86 ✓ Verified by PartsTable
— · BALL BEARING
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

The TIRE,PNEUMATIC,VEHICULAR is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, corner_shape: SQUARE CENTER FLANGE RIGHT BODY CORNER, flange_width: 0.5000 INCHES NOMINAL IN, tire_strength: G LOAD RANGE, overall_length: 1.5000 INCHES NOMINAL IN, special_features: BIAS TIRE TUBE TYPE W/FLAP. FLAP MUST BE INCLUDED W/TIRE.

RADIAL AND BIAS TIRES CANNOT BE MIXED ON THE SAME VEHICLE.. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-160-6679, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TR-86
NSN: 3120-00-160-6679
FSC: 3120
CAGE: 80195 — ED ETNYRE & CO (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
corner_shapeSQUARE CENTER FLANGE RIGHT BODY CORNER
flange_width0.5000 INCHES NOMINAL IN
tire_strengthG LOAD RANGE
overall_length1.5000 INCHES NOMINAL IN
special_featuresBIAS TIRE TUBE TYPE W/FLAP. FLAP MUST BE INCLUDED W/TIRE. RADIAL AND BIAS TIRES CANNOT BE MIXED ON THE SAME VEHICLE.
style_designatorSOLID, EXTERNAL FLANGE
body_inside_diameter0.3750 INCHES MINIMUM AND 0.4750 INCHES MAXIMUM IN
tire_ply_arrangementBIAS
end_to_flange_distance0.2340 INCHES MINIMUM AND 0.2660 INCHES MAXIMUM IN
left_end_body_diameter0.8590 INCHES MINIMUM AND 0.8900 INCHES MAXIMUM IN
end_item_identificationA/F 25K LOADER (NSN 2520-00-842-8316)
NSN3120-00-160-6679
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: TR-86 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CORNER SHAPE: SQUARE CENTER FLANGE LEFT BODY CORNER
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: SOLID, EXTERNAL FLANGE
TECHNICAL CHARACTERISTICS (FLIS)
CORNER SHAPESQUARE CENTER FLANGE LEFT BODY CORNER
CORNER SHAPESQUARE CENTER FLANGE OUTSIDE RIGHT CORNER
MATERIALSTEEL OVERALL
CORNER SHAPESQUARE CENTER FLANGE RIGHT BODY CORNER
CORNER SHAPESQUARE INSIDE LEFT CORNER
STYLE DESIGNATORSOLID, EXTERNAL FLANGE
CORNER SHAPEROUND OUTSIDE LEFT CORNER
CORNER SHAPESQUARE INSIDE RIGHT CORNER
LEFT END BODY DIAMETER0.8590 INCHES MINIMUM AND 0.8900 INCHES MAXIMUM IN
CORNER SHAPESQUARE CENTER FLANGE OUTSIDE LEFT CORNER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
TR-25Interchangeable
interchangeable cross-reference
interchangeable
ZZ-T-381/GP3/9.00-15/F/PTHRInterchangeable
interchangeable cross-reference
interchangeable
TR-86Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy TR-86?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TR-86?
TR-86 is a TIRE,PNEUMATIC,VEHICULAR.
What parts can replace TR-86?
There are 3 known substitutes for TR-86: TR-25, ZZ-T-381/GP3/9.00-15/F/PTHR, TR-86. Substitute compatibility should be verified for your specific system.
What is the NSN for TR-86?
TR-86 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-160-6679. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TR-86

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026