TQ3 — WRENCH,TORQUE
✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW
TQ3: WRENCH,TORQUE.
The WRENCH,TORQUE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, gage_thickness: 0.019 INCHES NOMINAL IN, drive_end_shape: SQUARE SINGLE END EXTERNAL, furnished_items: CASE, torque_capacity: 0.0 INCH-POUNDS MINIMUM AND 30.0 INCH-POUNDS MAXIMUM IN, outside_diameter: 2.062 INCHES NOMINAL IN. This part is cataloged in the U.S.
Government catalog under NSN 5330-00-246-9926, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
TQ3
NSN: 5330-00-246-9926 NIINs: 002469926 , 008398139 FSC: 5330 — Packing and Gasket MaterialsCAGE: 63857 — CIRCOR NAVAL SOLUTIONS LLC DBA WARREN PUMPS (USA)
SPECIFICATIONS
material STEEL OVERALL gage_thickness 0.019 INCHES NOMINAL IN drive_end_shape SQUARE SINGLE END EXTERNAL furnished_items CASE torque_capacity 0.0 INCH-POUNDS MINIMUM AND 30.0 INCH-POUNDS MAXIMUM IN outside_diameter 2.062 INCHES NOMINAL IN style_designator RIGID FRAME END DRIVE aperture_diameter 1.391 INCHES NOMINAL IN surface_treatment CHROMIUM OVERALL drive_surface_size 0.250 INCHES NOMINAL SINGLE END IN torque_signal_method DIAL INDICATOR torque_scale_graduation 1.00 INCH-POUNDS IN NSN 5330-00-246-9926
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: TQ3
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
• STYLE DESIGNATOR: CIRCULAR
• MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-693 CL A/CANCELLED FED SPEC SINGLE MATERIAL RESPONSE OVERALL
• CROSS-SECTIONAL SHAPE STYLE: METAL
• OUTSIDE DIAMETER: 2.062 INCHES NOMINAL IN
• APERTURE DIAMETER: 1.391 INCHES NOMINAL IN
• CENTER TO CENTER DISTANCE: 0.062 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS 0.031 INCHES NOMINAL IN STYLE DESIGNATOR CIRCULAR MATERIAL DOCUMENT AND CLASSIFICATION QQ-S-693 CL A/CANCELLED FED SPEC SINGLE MATERIAL RESPONSE OVERALL CROSS-SECTIONAL SHAPE STYLE METAL OUTSIDE DIAMETER 2.062 INCHES NOMINAL IN APERTURE DIAMETER 1.391 INCHES NOMINAL IN MATERIAL STEEL OVERALL CENTER TO CENTER DISTANCE 0.062 INCHES NOMINAL IN GAGE THICKNESS 0.019 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
BS8-2334 PIECE5 Reference document Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
H3105854PC67 Same NSN cross-reference Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN status Active · U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demand No demilitarization required
Ready to buy TQ3?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TQ3?
TQ3 is a WRENCH,TORQUE.
What parts can replace TQ3?
There are 2 known substitutes for TQ3: BS8-2334 PIECE5, H3105854PC67. Substitute compatibility should be verified for your specific system.
What is the NSN for TQ3?
TQ3 is cataloged in the U.S. Government catalog under NSN 5330-00-246-9926. This indicates validated use in U.S. government and defense supply chains.