PartsTable
Technical Data Sheet
Download PDF

TP430 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

TP430: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 482 OVERALL, nut_style: HEXAGON, nut_height: 0.209 INCHES MINIMUM AND 0.229 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-753-8146, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TP430
NSN: 5310-00-753-8146
FSC: 5310 — Nuts and Washers
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialCOPPER ALLOY 482 OVERALL
nut_styleHEXAGON
nut_height0.209 INCHES MINIMUM AND 0.229 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
countersink_angle85.0 DEGREES MINIMUM AND 95.0 DEGREES MAXIMUM NUT
width_across_flats0.372 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN
nominal_thread_size0.250 INCHES IN
bearing_surface_typeCHAMFERED OR WASHER FACED
bearing_surface_finish125.0 MICROINCHES
thread_quantity_per_inch20
NSN5310-00-753-8146
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: TP430 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.372 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN
•
BEARING SURFACE FINISH: 125.0 MICROINCHES
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-637 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
NUT HEIGHT: 0.209 INCHES MINIMUM AND 0.229 INCHES MAXIMUM IN
•
COUNTERSINK ANGLE: 85.0 DEGREES MINIMUM AND 95.0 DEGREES MAXIMUM NUT
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.372 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN
BEARING SURFACE FINISH125.0 MICROINCHES
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-637 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
NUT HEIGHT0.209 INCHES MINIMUM AND 0.229 INCHES MAXIMUM IN
COUNTERSINK ANGLE85.0 DEGREES MINIMUM AND 95.0 DEGREES MAXIMUM NUT
NUT STYLEHEXAGON
THREAD CLASS2B
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy TP430?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TP430?
TP430 is a NUT,PLAIN,HEXAGON.
What is the NSN for TP430?
TP430 is cataloged in the U.S. Government catalog under NSN 5310-00-753-8146. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TP430