PartsTable
Technical Data Sheet
PartsTable / COMPONENT / TP2818
TP2818 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BOLT,MACHINE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1035 OVERALL, head_style: HEXAGON, head_height: 0.181 INCHES MINIMUM AND 0.194 INCHES MAXIMUM IN, thread_class: 3A A, thread_length: 0.625 INCHES MAXIMUM IN, fastener_length: 0.625 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-360-7999, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TP2818
NSN: 5306-00-360-7999
FSC: 5306
CAGE: 72447 — DANA COMMERCIAL VEHICLE MANUFACTURING, LLC DBA DANA COMMERCIAL VEHICLE PRODUCTS (USA)
SPECIFICATIONS
materialSTEEL COMP 1035 OVERALL
head_styleHEXAGON
head_height0.181 INCHES MINIMUM AND 0.194 INCHES MAXIMUM IN
thread_class3A A
thread_length0.625 INCHES MAXIMUM IN
fastener_length0.625 INCHES NOMINAL IN
hardness_rating23.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
features_providedUNFINISHED HEAD
surface_treatmentCADMIUM OVERALL
width_between_flats0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
minimum_yield_strength95000 POUNDS PER SQUARE INCH LBS
NSN5306-00-360-7999
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: TP2818 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND
•
FASTENER LENGTH: 0.625 INCHES NOMINAL IN
•
WIDTH BETWEEN FLATS: 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
•
HEAD STYLE: HEXAGON
•
THREAD CLASS: 3A A
•
HEAD HEIGHT: 0.181 INCHES MINIMUM AND 0.194 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.625 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND
FASTENER LENGTH0.625 INCHES NOMINAL IN
WIDTH BETWEEN FLATS0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
HEAD STYLEHEXAGON
THREAD CLASS3A A
HEAD HEIGHT0.181 INCHES MINIMUM AND 0.194 INCHES MAXIMUM IN
THREAD LENGTH0.625 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL COMP 1035 OVERALL
HARDNESS RATING23.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
1537405Upgraded Successor
successor cross-reference
successor
2818Interchangeable
interchangeable cross-reference
interchangeable
864DPC38Interchangeable
interchangeable cross-reference
interchangeable
311-00Interchangeable
interchangeable cross-reference
interchangeable
31G42Interchangeable
interchangeable cross-reference
interchangeable
ANGIOCATHInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy TP2818?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TP2818?
TP2818 is a BOLT,MACHINE.
What parts can replace TP2818?
There are 14 known substitutes for TP2818: 1537405, 2818, 864DPC38 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for TP2818?
TP2818 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-360-7999. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TP2818

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026