PartsTable
Technical Data Sheet
Download PDF

TM64-S01X — MOUNT,RESILIENT,UTILITY

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

TM64-S01X: MOUNT,RESILIENT,UTILITY.

The MOUNT,RESILIENT,UTILITY is a the manufacturer industrial component. Key specifications include height: 1.520 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING CUP, load_rating: 35.0 POUNDS MAXIMUM LBS, thread_size: 3/8-24 ALL THREADED PORTIONS, flange_width: 2.375 INCHES NOMINAL IN, flange_length: 2.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-521-9953, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TM64-S01X
NSN: 5340-01-521-9953
FSC: 5340 — Hardware, Commercial
CAGE: 0LRN7 — SHOCK TECH INC DBA SHOCK TECH INC (USA)
SPECIFICATIONS
height1.520 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING CUP
load_rating35.0 POUNDS MAXIMUM LBS
thread_size3/8-24 ALL THREADED PORTIONS
flange_width2.375 INCHES NOMINAL IN
flange_length2.375 INCHES NOMINAL IN
flange_thickness0.150 INCHES NOMINAL IN
special_featuresTHIS IS JUST THE SAME AS PART NUMBER TM64-S00 EXCEPT IT HAS WRENCH FLATS FOR THE TOP
style_designatorROUND FOUR-HOLE FLANGE
flange_mounting_hole_diameter0.200 INCHES NOMINAL IN
distance_between_mounting_hole_centers1.942 INCHES MINIMUM AND 1.954 INCHES MAXIMUM IN
shortest_distance_between_mounting_hole_centers1.942 INCHES MINIMUM AND 1.954 INCHES MAXIMUM IN
NSN5340-01-521-9953
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: TM64-S01X MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE MOUNTING HOLE DIAMETER: 0.200 INCHES NOMINAL IN
•
LOAD RATING: 35.0 POUNDS MAXIMUM LBS
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 1.942 INCHES MINIMUM AND 1.954 INCHES MAXIMUM IN
•
FLANGE THICKNESS: 0.150 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ROUND FOUR-HOLE FLANGE
•
FLANGE LENGTH: 2.375 INCHES NOMINAL IN
•
SHORTEST DISTANCE BETWEEN MOUNTING HOLE CENTERS: 1.942 INCHES MINIMUM AND 1.954 INCHES MAXIMUM IN
•
HEIGHT: 1.520 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FLANGE MOUNTING HOLE DIAMETER0.200 INCHES NOMINAL IN
LOAD RATING35.0 POUNDS MAXIMUM LBS
DISTANCE BETWEEN MOUNTING HOLE CENTERS1.942 INCHES MINIMUM AND 1.954 INCHES MAXIMUM IN
FLANGE THICKNESS0.150 INCHES NOMINAL IN
STYLE DESIGNATORROUND FOUR-HOLE FLANGE
FLANGE LENGTH2.375 INCHES NOMINAL IN
SHORTEST DISTANCE BETWEEN MOUNTING HOLE CENTERS1.942 INCHES MINIMUM AND 1.954 INCHES MAXIMUM IN
HEIGHT1.520 INCHES NOMINAL IN
THREAD SIZE3/8-24 ALL THREADED PORTIONS
SPECIAL FEATURESTHIS IS JUST THE SAME AS PART NUMBER TM64-S00 EXCEPT IT HAS WRENCH FLATS FOR THE TOP
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy TM64-S01X?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TM64-S01X?
TM64-S01X is a MOUNT,RESILIENT,UTILITY.
What is the NSN for TM64-S01X?
TM64-S01X is cataloged in the U.S. Government catalog under NSN 5340-01-521-9953. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TM64-S01X

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.