TM10-.033OHMS1PC — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

TM10-.033OHMS1PC: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include material: ALUMINUM ALLOY HEAT SINK, body_width: 0.420 INCHES NOMINAL0.420 INCHES NOMINAL IN, body_height: 0.390 INCHES NOMINAL0.390 INCHES NOMINAL IN, body_length: 0.750 INCHES NOMINAL0.750 INCHES NOMINAL IN, cubic_measure: 0.145 CUBIC INCHES0.145 CUBIC INCHES, terminal_type: TAB, SOLDER LUGTAB, SOLDER LUG. This part is cataloged in the U.S.

Government catalog under NSN 5905-01-176-1615, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ TM10-.033OHMS1PC

NSN: 5905-01-176-1615
FSC: 5905 — Resistor
CAGE: 15915 — TEPRO OF FLORIDA, INC. DBA TEPRO OF FLORIDA DIV TEPRO OF FLORIDA (USA)

SPECIFICATIONS

material	ALUMINUM ALLOY HEAT SINK
body_width	0.420 INCHES NOMINAL0.420 INCHES NOMINAL IN
body_height	0.390 INCHES NOMINAL0.390 INCHES NOMINAL IN
body_length	0.750 INCHES NOMINAL0.750 INCHES NOMINAL IN
cubic_measure	0.145 CUBIC INCHES0.145 CUBIC INCHES
terminal_type	TAB, SOLDER LUGTAB, SOLDER LUG
inclosure_type	ENCAPSULATEDENCAPSULATED
terminal_width	0.050 INCHES NOMINAL0.050 INCHES NOMINAL IN
heat_sink_width	4.000 INCHES4.000 INCHES IN
terminal_length	0.312 INCHES NOMINAL0.312 INCHES NOMINAL IN
heat_sink_height	2.000 INCHES2.000 INCHES IN
heat_sink_length	6.000 INCHES6.000 INCHES IN
NSN	5905-01-176-1615

COMPONENT DIAGRAM

KEY FEATURES

•

RESISTANCE TOLERANCE IN PERCENT: -1.000 TO 1.000-1.000 TO 1.000

•

TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS: -100.0 TO 100.0-100.0 TO 100.0

•

ELECTRICAL RESISTANCE: 0.033 OHMS0.033 OHMS

•

INCLOSURE TYPE: ENCAPSULATEDENCAPSULATED

•

MOUNTING HOLE SIZE: 0.094 INCHES NOMINAL0.094 INCHES NOMINAL IN

•

TERMINAL TYPE: TAB, SOLDER LUGTAB, SOLDER LUG

•

DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH: 0.562 INCHES NOMINAL0.562 INCHES NOMINAL IN

•

HEAT SINK THICKNESS: 0.040 INCHES0.040 INCHES IN

TECHNICAL CHARACTERISTICS

RESISTANCE TOLERANCE IN PERCENT	-1.000 TO 1.000-1.000 TO 1.000
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS	-100.0 TO 100.0-100.0 TO 100.0
ELECTRICAL RESISTANCE	0.033 OHMS0.033 OHMS
INCLOSURE TYPE	ENCAPSULATEDENCAPSULATED
MOUNTING HOLE SIZE	0.094 INCHES NOMINAL0.094 INCHES NOMINAL IN
TERMINAL TYPE	TAB, SOLDER LUGTAB, SOLDER LUG
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	0.562 INCHES NOMINAL0.562 INCHES NOMINAL IN
HEAT SINK THICKNESS	0.040 INCHES0.040 INCHES IN
TERMINAL LENGTH	0.312 INCHES NOMINAL0.312 INCHES NOMINAL IN
BODY WIDTH	0.420 INCHES NOMINAL0.420 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 2

TM10-0R033FSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

ARH10X000G0R033FReference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy TM10-.033OHMS1PC?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is TM10-.033OHMS1PC?

TM10-.033OHMS1PC is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).

What parts can replace TM10-.033OHMS1PC?

There are 2 known substitutes for TM10-.033OHMS1PC: TM10-0R033F, ARH10X000G0R033F. Substitute compatibility should be verified for your specific system.

What is the NSN for TM10-.033OHMS1PC?

TM10-.033OHMS1PC is cataloged in the U.S. Government catalog under NSN 5905-01-176-1615. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

TM10-.033OHMS1PC — RESISTOR,FIXED,WIRE WOUND,INDUCT

Request a Quote — TM10-.033OHMS1PC