PartsTable
Technical Data Sheet
Download PDF

TLDNG-6-3-S-17 — NUT,SELF-LOCKING,BLIND RIVET

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

TLDNG-6-3-S-17: NUT,SELF-LOCKING,BLIND RIVET.

The NUT,SELF-LOCKING,BLIND RIVET is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 NUT, lubrication: DRY FILM LUBRICANT, nut_diameter: 0.518 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN, thread_class: 2A A, thread_series: UNIFIED NATIONAL JOINT FINE (UNJF), thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-653-6485, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TLDNG-6-3-S-17
NSN: 5310-01-653-6485
FSC: 5310 — Nuts and Washers
CAGE: 51439 — FATIGUE TECHNOLOGY, INC (USA)
SPECIFICATIONS
materialSTEEL COMP 304 NUT
lubricationDRY FILM LUBRICANT
nut_diameter0.518 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
thread_class2A A
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
thread_directionRIGHT-HAND
nominal_thread_size0.375 INCHES IN
NSN5310-01-653-6485
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: TLDNG-6-3-S-17 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION: DRY FILM LUBRICANT
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.375 INCHES IN
•
NUT DIAMETER: 0.518 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
•
THREAD CLASS: 2A A
•
MATERIAL: STEEL COMP 304 NUT
TECHNICAL CHARACTERISTICS
LUBRICATIONDRY FILM LUBRICANT
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.375 INCHES IN
NUT DIAMETER0.518 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
THREAD CLASS2A A
MATERIALSTEEL COMP 304 NUT
MATERIALSTEEL COMP 305 CAP
SUBSTITUTES & CROSS-REFERENCES 2
C21046Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
C21046-6-17Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy TLDNG-6-3-S-17?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TLDNG-6-3-S-17?
TLDNG-6-3-S-17 is a NUT,SELF-LOCKING,BLIND RIVET.
What parts can replace TLDNG-6-3-S-17?
There are 2 known substitutes for TLDNG-6-3-S-17: C21046, C21046-6-17. Substitute compatibility should be verified for your specific system.
What is the NSN for TLDNG-6-3-S-17?
TLDNG-6-3-S-17 is cataloged in the U.S. Government catalog under NSN 5310-01-653-6485. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TLDNG-6-3-S-17

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.