TL936-5-21-30 — PIN-RIVET

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

TL936-5-21-30: PIN-RIVET.

The PIN-RIVET is a the manufacturer industrial component. Key specifications include material: STEEL COMP 8740 OR STEEL COMP E4340 OVERALL, head_style: FLUSH COUNTERSUNK, grip_length: 1.302 INCHES MINIMUM AND 1.317 INCHES MAXIMUM IN, lubrication: CETYL ALCOHOL, shank_style: PIN-RIVET, TAPERED, THREADED, thread_class: 3A A. This part is cataloged in the U.S.

Government catalog under NSN 5320-00-623-6366, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

TL936-5-21-30

NSN: 5320-00-623-6366
FSC: 5320 — Rivets
CAGE: 97928 — HUCK INTL INC (USA)

SPECIFICATIONS

material	STEEL COMP 8740 OR STEEL COMP E4340 OVERALL
head_style	FLUSH COUNTERSUNK
grip_length	1.302 INCHES MINIMUM AND 1.317 INCHES MAXIMUM IN
lubrication	CETYL ALCOHOL
shank_style	PIN-RIVET, TAPERED, THREADED
thread_class	3A A
tip_diameter	0.3163 INCHES NOMINAL IN
shank_diameter	0.3403 INCHES NOMINAL IN
shear_strength	108000 SINGLE POUNDS PER SQUARE INCH
fastener_length	1.683 INCHES MINIMUM AND 1.708 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
countersink_angle	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
NSN	5320-00-623-6366

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.3403 INCHES NOMINAL IN

•

LUBRICATION: CETYL ALCOHOL

•

FASTENER LENGTH: 1.683 INCHES MINIMUM AND 1.708 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

•

CRITICALITY CODE JUSTIFICATION: FEAT

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL

•

TIP DIAMETER: 0.3163 INCHES NOMINAL IN

•

HEAD STYLE: FLUSH COUNTERSUNK

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.3403 INCHES NOMINAL IN
LUBRICATION	CETYL ALCOHOL
FASTENER LENGTH	1.683 INCHES MINIMUM AND 1.708 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
CRITICALITY CODE JUSTIFICATION	FEAT
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
TIP DIAMETER	0.3163 INCHES NOMINAL IN
HEAD STYLE	FLUSH COUNTERSUNK
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD SIZE	0.3125 INCHES IN

SUBSTITUTES & CROSS-REFERENCES 3

3M486A5-21-30Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

ST3M486A5-21-30Reference document

Same NSN cross-reference

Reference document — Secondary reference

3M486Reference document

Same NSN cross-reference

Reference document — Drawing number reference only

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required

Ready to buy TL936-5-21-30?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is TL936-5-21-30?

TL936-5-21-30 is a PIN-RIVET.

What parts can replace TL936-5-21-30?

There are 3 known substitutes for TL936-5-21-30: 3M486A5-21-30, ST3M486A5-21-30, 3M486. Substitute compatibility should be verified for your specific system.

What is the NSN for TL936-5-21-30?

TL936-5-21-30 is cataloged in the U.S. Government catalog under NSN 5320-00-623-6366. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

TL936-5-21-30 — PIN-RIVET

Request a Quote — TL936-5-21-30