PartsTable
Technical Data Sheet
Download PDF

TL803BHX1158 — CATCH,CLAMPING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

TL803BHX1158: CATCH,CLAMPING.

The CATCH,CLAMPING is a the manufacturer industrial component. Key specifications include material: STEEL HANDLE, hole_diameter: 0.167 INCHES NOMINAL IN, overall_width: 1.400 INCHES NOMINAL IN, overall_height: 0.530 INCHES NOMINAL IN, overall_length: 1.180 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the U.S.

Government catalog under NSN 5340-01-387-1263, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TL803BHX1158
NSN: 5340-01-387-1263
FSC: 5340 — Hardware, Commercial
CAGE: 72794 — SOUTHCO INC (USA)
SPECIFICATIONS
materialSTEEL HANDLE
hole_diameter0.167 INCHES NOMINAL IN
hole_quantity2
overall_width1.400 INCHES NOMINAL IN
overall_height0.530 INCHES NOMINAL IN
overall_length1.180 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
surface_treatmentZINC BASE
NSN5340-01-387-1263
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: TL803BHX1158 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
SURFACE TREATMENT: ZINC HANDLE
•
MATERIAL: STEEL HANDLE
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.530 INCHES NOMINAL IN
MOUNTING METHODUNTHREADED HOLE(S)
OVERALL LENGTH1.180 INCHES NOMINAL IN
OVERALL WIDTH1.400 INCHES NOMINAL IN
SURFACE TREATMENTZINC HANDLE
SURFACE TREATMENTZINC BASE
MATERIALSTEEL HANDLE
MATERIALSTEEL BASE
HOLE QUANTITY2
HOLE DIAMETER0.167 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
850736-0001Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy TL803BHX1158?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TL803BHX1158?
TL803BHX1158 is a CATCH,CLAMPING.
What parts can replace TL803BHX1158?
There is 1 known substitute for TL803BHX1158: 850736-0001. Substitute compatibility should be verified for your specific system.
What is the NSN for TL803BHX1158?
TL803BHX1158 is cataloged in the U.S. Government catalog under NSN 5340-01-387-1263. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TL803BHX1158