TL802GSS — CATCH,CLAMPING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

TL802GSS: CATCH,CLAMPING.

The CATCH,CLAMPING is a the manufacturer industrial component. Key specifications include design_type: LOOP ENGAGING, hole_diameter: 0.141 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN, overall_width: 0.850 INCHES MINIMUM AND 0.910 INCHES MAXIMUM IN, overall_height: 0.500 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN, overall_length: 3.030 INCHES NOMINAL IN, surface_treatment: PASSIVATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-269-7645, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

TL802GSS

NSN: 5340-01-269-7645
FSC: 5340 — Hardware, Commercial
CAGE: 72794 — SOUTHCO INC (USA)

SPECIFICATIONS

design_type	LOOP ENGAGING
hole_diameter	0.141 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
hole_quantity	2
overall_width	0.850 INCHES MINIMUM AND 0.910 INCHES MAXIMUM IN
overall_height	0.500 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
overall_length	3.030 INCHES NOMINAL IN
surface_treatment	PASSIVATE OVERALL
engaging_surface_width	0.720 INCHES NOMINAL IN
engaging_surface_thickness	0.080 INCHES NOMINAL IN
surface_treatment_document_and_classification	MIL-STD-171,FINISH 5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL
NSN	5340-01-269-7645

COMPONENT DIAGRAM

KEY FEATURES

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-STD-171,FINISH 5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL

•

DESIGN TYPE: LOOP ENGAGING

•

ENGAGING SURFACE WIDTH: 0.720 INCHES NOMINAL IN

•

SURFACE TREATMENT: PASSIVATE OVERALL

•

ENGAGING SURFACE THICKNESS: 0.080 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

OVERALL HEIGHT	0.500 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-STD-171,FINISH 5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL
DESIGN TYPE	LOOP ENGAGING
ENGAGING SURFACE WIDTH	0.720 INCHES NOMINAL IN
OVERALL LENGTH	3.030 INCHES NOMINAL IN
OVERALL WIDTH	0.850 INCHES MINIMUM AND 0.910 INCHES MAXIMUM IN
SURFACE TREATMENT	PASSIVATE OVERALL
ENGAGING SURFACE THICKNESS	0.080 INCHES NOMINAL IN
HOLE QUANTITY	2
HOLE DIAMETER	0.141 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN

OTHER ITEMS IN FSC 5340 — Hardware, Commercial

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275

SUBSTITUTES & CROSS-REFERENCES 5

1395AS975Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

5340PL0857436Reference document

Same NSN cross-reference

Reference document — Informative reference only

7882-7-SSReference document

Same NSN cross-reference

Reference document — Secondary reference

16103060-1Reference document

Same NSN cross-reference

Reference document — Drawing number reference only

7882-7SS-PASSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy TL802GSS?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is TL802GSS?

TL802GSS is a CATCH,CLAMPING.

What parts can replace TL802GSS?

There are 5 known substitutes for TL802GSS: 1395AS975, 5340PL0857436, 7882-7-SS and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for TL802GSS?

TL802GSS is cataloged in the U.S. Government catalog under NSN 5340-01-269-7645. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

TL802GSS — CATCH,CLAMPING

Request a Quote — TL802GSS