PartsTable
Technical Data Sheet
Download PDF

TL300ASS — CATCH,CLAMPING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

TL300ASS: CATCH,CLAMPING.

The CATCH,CLAMPING is a the manufacturer industrial component. Key specifications include width: 0.944 INCHES NOMINAL IN, height: 0.370 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING OVERALL, hole_diameter: 0.209 INCHES MAXIMUM IN, overall_width: 1.201 INCHES NOMINAL IN, overall_height: 0.630 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-387-0535, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TL300ASS
NSN: 5340-01-387-0535
FSC: 5340 — Hardware, Commercial
CAGE: 3HGZ1 — GREAT LAKES PROCUREMENT DBA STARWARES (USA)
SPECIFICATIONS
width0.944 INCHES NOMINAL IN
height0.370 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING OVERALL
hole_diameter0.209 INCHES MAXIMUM IN
hole_quantity4
overall_width1.201 INCHES NOMINAL IN
overall_height0.630 INCHES NOMINAL IN
overall_length1.000 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
special_features300 SERIES CRES STEEL; NOTE: SEPARATE STRIKE P/N TL300-8SS, CODE 72794
style_designatorLEVEL
features_providedDOUBLE PRONG
NSN5340-01-387-0535
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: TL300ASS MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE HOLE QUANTITY: 2
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL THICKNESS: 0.063 INCHES NOMINAL IN
•
STYLE DESIGNATOR: LEVEL
•
CATCH STRIKE STYLE: MORTISE
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.630 INCHES NOMINAL IN
SURFACE HOLE QUANTITY2
MOUNTING METHODUNTHREADED HOLE(S)
MATERIAL THICKNESS0.063 INCHES NOMINAL IN
STYLE DESIGNATORLEVEL
CATCH STRIKE STYLEMORTISE
OVERALL LENGTH1.000 INCHES NOMINAL IN
OVERALL WIDTH1.201 INCHES NOMINAL IN
FEATURES PROVIDEDDOUBLE PRONG
HEIGHT0.370 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy TL300ASS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TL300ASS?
TL300ASS is a CATCH,CLAMPING.
What is the NSN for TL300ASS?
TL300ASS is cataloged in the U.S. Government catalog under NSN 5340-01-387-0535. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TL300ASS