PartsTable
Technical Data Sheet
Download PDF

TL2862-3-4 — SCREW,EXTERNALLY RELIEVED BODY

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

TL2862-3-4: SCREW,EXTERNALLY RELIEVED BODY.

The SCREW,EXTERNALLY RELIEVED BODY is a the manufacturer industrial component. Key specifications include head_style: FLAT CHAMFER, head_height: 0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.262 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN, thread_length: 0.115 INCHES MINIMUM AND 0.165 INCHES MAXIMUM IN, fastener_length: 0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-353-2004, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TL2862-3-4
NSN: 5305-01-353-2004
FSC: 5305 — Screws
CAGE: 24235 — WILLIAMS INTERNATIONAL CO., L.L.C. (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 OR STEEL COMP XM-7 OR STEEL COMP 303 OVERALL
head_styleFLAT CHAMFER
head_height0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.262 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
thread_length0.115 INCHES MINIMUM AND 0.165 INCHES MAXIMUM IN
fastener_length0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_across_flats0.1406 INCHES MINIMUM AND 0.1426 INCHES MAXIMUM IN
internal_drive_styleHEXAGON
nominal_thread_diameter0.164 INCHES IN
NSN5305-01-353-2004
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: TL2862-3-4 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.1406 INCHES MINIMUM AND 0.1426 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.115 INCHES MINIMUM AND 0.165 INCHES MAXIMUM IN
•
FIRST DIAMETER FROM HEAD: 0.100 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
HEAD STYLE: FLAT CHAMFER
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.1406 INCHES MINIMUM AND 0.1426 INCHES MAXIMUM IN
HEAD HEIGHT0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN
FASTENER LENGTH0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.115 INCHES MINIMUM AND 0.165 INCHES MAXIMUM IN
FIRST DIAMETER FROM HEAD0.100 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.164 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy TL2862-3-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TL2862-3-4?
TL2862-3-4 is a SCREW,EXTERNALLY RELIEVED BODY.
What is the NSN for TL2862-3-4?
TL2862-3-4 is cataloged in the U.S. Government catalog under NSN 5305-01-353-2004. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TL2862-3-4

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.