PartsTable
Technical Data Sheet
PartsTable / COMPONENT / TL2
TL2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The TERMINAL,LUG is a the manufacturer industrial component. Key specifications include phase: SINGLE OR THREE, material: COPPER OVERALL, design_type: PLAIN, rated_swing: 19.000 INCHES NOMINAL IN, current_type: AC, mounting_type: FLOOR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-152-2140, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TL2
NSN: 5330-00-152-2140
FSC: 5330
CAGE: 63857 — CIRCOR NAVAL SOLUTIONS LLC DBA WARREN PUMPS (USA)
SPECIFICATIONS
phaseSINGLE OR THREE
materialCOPPER OVERALL
design_typePLAIN
rated_swing19.000 INCHES NOMINAL IN
current_typeAC
mounting_typeFLOOR
overall_width0.660 INCHES IN
overall_length1.440 INCHES IN
performance_typeSTANDARD DUTY
special_featuresUSED WITH AN METASETZ TALLY CONTROLLER VIA ETHERNET CABLE; 2 X STATUS INDICATORS; SHOE MOUNT BRACKET
voltage_in_volts208.0 AND 240.0
attachment_methodROUND HOLE
NSN5330-00-152-2140
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: TL2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.250 INCHES NOMINAL IN
•
PERIPHERAL DIAMETER: 3.750 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY OVERALL
•
ATTACHMENT METHOD: ROUND HOLE
•
CROSS-SECTIONAL HEIGHT: 1.250 INCHES NOMINAL IN
•
ATTACHMENT HOLE DIAMETER: 0.500 INCHES NOMINAL IN
•
ATTACHMENT FEATURE QUANTITY: 2
•
RIM SURFACE WIDTH: 0.562 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.250 INCHES NOMINAL IN
PERIPHERAL DIAMETER3.750 INCHES NOMINAL IN
MATERIALCOPPER ALLOY OVERALL
ATTACHMENT METHODROUND HOLE
CROSS-SECTIONAL HEIGHT1.250 INCHES NOMINAL IN
ATTACHMENT HOLE DIAMETER0.500 INCHES NOMINAL IN
ATTACHMENT FEATURE QUANTITY2
RIM SURFACE WIDTH0.562 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.500 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEFLANGE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
11269255Interchangeable
interchangeable cross-reference
interchangeable
TL2Interchangeable
interchangeable cross-reference
interchangeable
1401AS117-1Interchangeable
interchangeable cross-reference
interchangeable
SMB500422Interchangeable
interchangeable cross-reference
interchangeable
7530Interchangeable
interchangeable cross-reference
interchangeable
5311Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy TL2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TL2?
TL2 is a TERMINAL,LUG.
What parts can replace TL2?
There are 6 known substitutes for TL2: 11269255, TL2, 1401AS117-1 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for TL2?
TL2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-152-2140. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TL2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026