TL18003-072-156S — CATCH,FLUSH

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

TL18003-072-156S: CATCH,FLUSH.

The CATCH,FLUSH is a the manufacturer industrial component. Key specifications include width: 1.880 INCHES NOMINAL IN, length: 2.160 INCHES NOMINAL IN, material: UNABLE TO DECODE, style_designator: FLUSH LEVER ACTUATOR, surface_treatment: UNABLE TO DECODE, bolt_offset_distance: 0.156 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-067-4741, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

TL18003-072-156S

NSN: 5340-01-067-4741
FSC: 5340 — Hardware, Commercial
CAGE: 29372 — HOWMET GLOBAL FASTENING SYSTEMS INC. DIV TRIDAIR PRODUCTS (USA)

SPECIFICATIONS

width	1.880 INCHES NOMINAL IN
length	2.160 INCHES NOMINAL IN
material	UNABLE TO DECODE
style_designator	FLUSH LEVER ACTUATOR
surface_treatment	UNABLE TO DECODE
bolt_offset_distance	0.156 INCHES NOMINAL IN
lever_offset_distance	0.072 INCHES NOMINAL IN
mounting_hole_diameter	0.161 INCHES NOMINAL IN
center_to_center_distance_between_mounting_holes_along_width	1.380 INCHES NOMINAL IN
center_to_center_distance_between_mounting_holes_along_length	1.120 INCHES NOMINAL IN
NSN	5340-01-067-4741

COMPONENT DIAGRAM

KEY FEATURES

•

BOLT OFFSET DISTANCE: 0.156 INCHES NOMINAL IN

•

LENGTH: 2.160 INCHES NOMINAL IN

•

LEVER OFFSET DISTANCE: 0.072 INCHES NOMINAL IN

•

STYLE DESIGNATOR: FLUSH LEVER ACTUATOR

•

MOUNTING HOLE DIAMETER: 0.161 INCHES NOMINAL IN

•

CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH: 1.380 INCHES NOMINAL IN

•

CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH: 1.120 INCHES NOMINAL IN

•

SURFACE TREATMENT: UNABLE TO DECODE

TECHNICAL CHARACTERISTICS

BOLT OFFSET DISTANCE	0.156 INCHES NOMINAL IN
LENGTH	2.160 INCHES NOMINAL IN
LEVER OFFSET DISTANCE	0.072 INCHES NOMINAL IN
STYLE DESIGNATOR	FLUSH LEVER ACTUATOR
MOUNTING HOLE DIAMETER	0.161 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH	1.380 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH	1.120 INCHES NOMINAL IN
SURFACE TREATMENT	UNABLE TO DECODE
WIDTH	1.880 INCHES NOMINAL IN
MATERIAL	UNABLE TO DECODE

SUBSTITUTES & CROSS-REFERENCES 3

9M185Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

9M185-072-156Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

H5100-072-156Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy TL18003-072-156S?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is TL18003-072-156S?

TL18003-072-156S is a CATCH,FLUSH.

What parts can replace TL18003-072-156S?

There are 3 known substitutes for TL18003-072-156S: 9M185, 9M185-072-156, H5100-072-156. Substitute compatibility should be verified for your specific system.

What is the NSN for TL18003-072-156S?

TL18003-072-156S is cataloged in the U.S. Government catalog under NSN 5340-01-067-4741. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

TL18003-072-156S — CATCH,FLUSH

Request a Quote — TL18003-072-156S