PartsTable
Technical Data Sheet
Download PDF

TL110-15-1 — STRIKE,CATCH

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

TL110-15-1: STRIKE,CATCH.

The STRIKE,CATCH is a the manufacturer industrial component. Key specifications include height: 0.3540 INCHES NOMINAL IN, material: UNABLE TO DECODE, overall_length: 0.6290 INCHES NOMINAL IN, material_thickness: 0.0790 INCHES NOMINAL IN, mounting_hole_diameter: 0.1000 INCHES MINIMUM AND 0.1040 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-465-0692, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TL110-15-1
NSN: 5340-01-465-0692
FSC: 5340 — Hardware, Commercial
CAGE: 72794 — SOUTHCO INC (USA)
SPECIFICATIONS
height0.3540 INCHES NOMINAL IN
materialUNABLE TO DECODE
hole_quantity2
overall_length0.6290 INCHES NOMINAL IN
material_thickness0.0790 INCHES NOMINAL IN
mounting_hole_diameter0.1000 INCHES MINIMUM AND 0.1040 INCHES MAXIMUM IN
NSN5340-01-465-0692
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: TL110-15-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE DIAMETER: 0.1000 INCHES MINIMUM AND 0.1040 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.0790 INCHES NOMINAL IN
•
HEIGHT: 0.3540 INCHES NOMINAL IN
•
MATERIAL: UNABLE TO DECODE
•
HOLE QUANTITY: 2
TECHNICAL CHARACTERISTICS
MOUNTING HOLE DIAMETER0.1000 INCHES MINIMUM AND 0.1040 INCHES MAXIMUM IN
OVERALL LENGTH0.6290 INCHES NOMINAL IN
MATERIAL THICKNESS0.0790 INCHES NOMINAL IN
HEIGHT0.3540 INCHES NOMINAL IN
MATERIALUNABLE TO DECODE
HOLE QUANTITY2
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy TL110-15-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TL110-15-1?
TL110-15-1 is a STRIKE,CATCH.
What is the NSN for TL110-15-1?
TL110-15-1 is cataloged in the U.S. Government catalog under NSN 5340-01-465-0692. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TL110-15-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.