PartsTable
Technical Data Sheet
PartsTable / COMPONENT / TL-1610-1
TL-1610-1 ✓ Verified by PartsTable
— · COMPONENT
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

The BUSHING,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: IRON, split_width: 0.125 INCHES NOMINAL IN, overall_length: 1.000 INCHES NOMINAL IN, inside_diameter: 1.000 INCHES NOMINAL IN, surface_treatment: ENAMEL, taper_included_angle: 4 DEGREES. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5365-01-548-2243, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TL-1610-1
NSN: 5365-01-548-2243
FSC: 5365
CAGE: 76474 — EMERSON POWER TRANSMISSION CORPORATION DIV EPT (USA)
SPECIFICATIONS
materialIRON
split_width0.125 INCHES NOMINAL IN
overall_length1.000 INCHES NOMINAL IN
inside_diameter1.000 INCHES NOMINAL IN
surface_treatmentENAMEL
taper_included_angle4 DEGREES
tapered_portion_length1.000 INCHES NOMINAL IN
end_item_identificationUSED ON MEGGITT AERIAL GUNNERY TARGET SYSTEM AGS-36/A/A37-U-36
large_end_outside_diameter2.250 INCHES NOMINAL IN
NSN5365-01-548-2243
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available BUSHING,TAPERED TITLE COMPONENT PN TL-1610-1 MFR BUSHING,TAPERED
KEY FEATURES
•
TAPER INCLUDED ANGLE: 4 DEGREES
•
TAPERED PORTION LENGTH: 1.000 INCHES NOMINAL IN
•
MATERIAL: IRON
•
SURFACE TREATMENT: ENAMEL
•
INSIDE DIAMETER: 1.000 INCHES NOMINAL IN
•
SPLIT WIDTH: 0.125 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
TAPER INCLUDED ANGLE4 DEGREES
TAPERED PORTION LENGTH1.000 INCHES NOMINAL IN
OVERALL LENGTH1.000 INCHES NOMINAL IN
MATERIALIRON
SURFACE TREATMENTENAMEL
END ITEM IDENTIFICATIONUSED ON MEGGITT AERIAL GUNNERY TARGET SYSTEM AGS-36/A/A37-U-36
INSIDE DIAMETER1.000 INCHES NOMINAL IN
SPLIT WIDTH0.125 INCHES NOMINAL IN
LARGE END OUTSIDE DIAMETER2.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
00664-0192Interchangeable
interchangeable cross-reference
interchangeable
RC20GF512JInterchangeable
interchangeable cross-reference
interchangeable
D16101Interchangeable
interchangeable cross-reference
interchangeable
16101Interchangeable
interchangeable cross-reference
interchangeable
056-21100-25Interchangeable
interchangeable cross-reference
interchangeable
0170-0052Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy TL-1610-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TL-1610-1?
TL-1610-1 is a BUSHING,TAPERED.
What parts can replace TL-1610-1?
There are 13 known substitutes for TL-1610-1: 00664-0192, RC20GF512J, D16101 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for TL-1610-1?
TL-1610-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5365-01-548-2243. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TL-1610-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026