TFM206D — BEARING,PLAIN,ROD END

✓ Government record, cited

— · BALL BEARING

PRODUCT OVERVIEW

TFM206D: BEARING,PLAIN,ROD END.

The BEARING,PLAIN,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 ROD END BODY, shank_style: EXTERNALLY THREADED, thread_class: 3A A, bore_diameter: 0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN, overall_length: 2.6875 INCHES NOMINAL IN, hardness_rating: 55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-904-9057, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

TFM206D

NSN: 3120-00-904-9057
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 77896 — REXNORD INDUSTRIES, LLC DIV AEROSSPACE BEARING OPERATION (USA)

SPECIFICATIONS

material	STEEL COMP 4130 ROD END BODY
shank_style	EXTERNALLY THREADED
thread_class	3A A
bore_diameter	0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
overall_length	2.6875 INCHES NOMINAL IN
hardness_rating	55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER
thread_diameter	0.438 INCHES NOMINAL IN
special_features	NAS559 STD KEYWAY IN SHANK
style_designator	BALL TYPE
thread_direction	RIGHT-HAND
surface_treatment	CHROMIUM INNER MEMBER
inner_member_width	0.8080 INCHES MINIMUM AND 0.8130 INCHES MAXIMUM IN
NSN	3120-00-904-9057

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK THREAD LENGTH: 1.3750 INCHES NOMINAL IN

•

BORE CENTER TO SHANK END DISTANCE: 2.1250 INCHES NOMINAL IN

•

INNER MEMBER WIDTH: 0.8080 INCHES MINIMUM AND 0.8130 INCHES MAXIMUM IN

•

HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM RACE INSERT

•

OUTER MEMBER WIDTH: 0.3500 INCHES MINIMUM AND 0.3600 INCHES MAXIMUM IN

•

STYLE DESIGNATOR: BALL TYPE

TECHNICAL CHARACTERISTICS

SHANK THREAD LENGTH	1.3750 INCHES NOMINAL IN
BORE CENTER TO SHANK END DISTANCE	2.1250 INCHES NOMINAL IN
INNER MEMBER WIDTH	0.8080 INCHES MINIMUM AND 0.8130 INCHES MAXIMUM IN
HARDNESS RATING	23.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM RACE INSERT
HARDNESS RATING	36.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM ROD END BODY
HARDNESS RATING	55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER
OUTER MEMBER WIDTH	0.3500 INCHES MINIMUM AND 0.3600 INCHES MAXIMUM IN
STYLE DESIGNATOR	BALL TYPE
THREAD DIAMETER	0.438 INCHES NOMINAL IN
OVERALL LENGTH	2.6875 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 7

KBNE6-300WSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

HRY6TL101Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

ARYT6E4Reference document

Same NSN cross-reference

Reference document — Secondary reference

MXJNKV6Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

77388Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

DREMS6-050Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy TFM206D?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is TFM206D?

TFM206D is a BEARING,PLAIN,ROD END.

What parts can replace TFM206D?

There are 7 known substitutes for TFM206D: KBNE6-300W, HRY6TL101, ARYT6E4 and 4 more. Substitute compatibility should be verified for your specific system.

What is the NSN for TFM206D?

TFM206D is cataloged in the U.S. Government catalog under NSN 3120-00-904-9057. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

TFM206D — BEARING,PLAIN,ROD END

Request a Quote — TFM206D