PartsTable
Technical Data Sheet
Download PDF

TF426-115 — RETAINER,PACKING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

TF426-115: RETAINER,PACKING.

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include special_features: ACTION ID 45403720, center_hole_diameter: 0.683 INCHES MINIMUM AND 0.685 INCHES MAXIMUM IN, cross-sectional_height: 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-516-6040, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TF426-115
NSN: 5330-00-516-6040
FSC: 5330 — Packing and Gasket Materials
CAGE: 07128 — TRELLEBORG SEALING SOLUTIONS EL SEGUNDO, INC. DBA TSS EL SEGUNDO (USA)
SPECIFICATIONS
special_featuresACTION ID 45403720
center_hole_diameter0.683 INCHES MINIMUM AND 0.685 INCHES MAXIMUM IN
cross-sectional_height0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
NSN5330-00-516-6040
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: TF426-115 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.683 INCHES MINIMUM AND 0.685 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
SPECIAL FEATURESACTION ID 45403720
CENTER HOLE DIAMETER0.683 INCHES MINIMUM AND 0.685 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
S12562-115Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy TF426-115?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TF426-115?
TF426-115 is a RETAINER,PACKING.
What parts can replace TF426-115?
There is 1 known substitute for TF426-115: S12562-115. Substitute compatibility should be verified for your specific system.
What is the NSN for TF426-115?
TF426-115 is cataloged in the U.S. Government catalog under NSN 5330-00-516-6040. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TF426-115