PartsTable
Technical Data Sheet
PartsTable / COMPONENT / TE3762-10
TE3762-10 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: RUBBER SYNTHETIC, design_type: FRICTION, overall_diameter: 1.343 INCHES NOMINAL IN, inside_diameter_length: 0.468 INCHES NOMINAL IN, round_cap_outside_surface_condition: SMOOTH, connector_nominal_thread_size_for_which_designed: 1.250 INCHES IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-928-2535, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TE3762-10
NSN: 5340-00-928-2535
FSC: 5340
CAGE: 90598 — ENGINEERED AIR SYSTEMS, INC. DBA DRS SUSTAINMENT SYSTEMS (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
design_typeFRICTION
overall_diameter1.343 INCHES NOMINAL IN
inside_diameter_length0.468 INCHES NOMINAL IN
round_cap_outside_surface_conditionSMOOTH
connector_nominal_thread_size_for_which_designed1.250 INCHES IN
NSN5340-00-928-2535
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: TE3762-10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: FRICTION
•
MATERIAL: RUBBER SYNTHETIC
•
CONNECTOR NOMINAL THREAD SIZE FOR WHICH DESIGNED: 1.250 INCHES IN
•
INSIDE DIAMETER LENGTH: 0.468 INCHES NOMINAL IN
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
•
OVERALL DIAMETER: 1.343 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
DESIGN TYPEFRICTION
MATERIALRUBBER SYNTHETIC
CONNECTOR NOMINAL THREAD SIZE FOR WHICH DESIGNED1.250 INCHES IN
INSIDE DIAMETER LENGTH0.468 INCHES NOMINAL IN
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
OVERALL DIAMETER1.343 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
A-38825Interchangeable
interchangeable cross-reference
interchangeable
38825Interchangeable
interchangeable cross-reference
interchangeable
32531Interchangeable
interchangeable cross-reference
interchangeable
5340PL0846336Interchangeable
Same NIIN cross-reference
interchangeable
TE3762-1Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy TE3762-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TE3762-10?
TE3762-10 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace TE3762-10?
There are 5 known substitutes for TE3762-10: A-38825, 38825, 32531 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for TE3762-10?
TE3762-10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-928-2535. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TE3762-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026