PartsTable
Technical Data Sheet
Download PDF

TC8 — CABLE ASSEMBLY,SPECIAL PURPOSE,E

✓ Government record, cited
Brother · MRO · MRO_GENERAL
PRODUCT OVERVIEW

TC8: CABLE ASSEMBLY,SPECIAL PURPOSE,E.

For Use With: - PT-10, PT-12, PT-15, PT-150, PT-20, PT-25, PT-6, PT-8. Key specifications include material: STEEL CORROSION RESISTING, design_type: THREADED, thread_class: 2A A, overall_width: 8.625 INCHES NOMINAL IN, overall_length: 20.500 INCHES NOMINAL IN, mounting_method: CLAMP. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-917-5886, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ TC8
NSN: 5340-00-917-5886
NIINs: 009175886, 011109868, 016241249, 016953851
FSC: 5340 — Hardware, Commercial
CAGE: 23540 — NIAGARA PLASTICS L.L.C. (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
design_typeTHREADED
thread_class2A A
overall_width8.625 INCHES NOMINAL IN
overall_length20.500 INCHES NOMINAL IN
mounting_methodCLAMP
overall_diameter0.812 INCHES NOMINAL IN
style_designatorNEEDLE CLIP
surface_treatmentGOLD CONTACT
inside_diameter_length0.625 INCHES NOMINAL IN
terminal_type_and_quantity8 PIN AXIALLY AT EACH END
round_cap_outside_surface_conditionRIBBED
NSN5340-00-917-5886
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: TC8 MFR: Brother ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: THREADED
•
OVERALL DIAMETER: 0.812 INCHES NOMINAL IN
•
THREAD CLASS: 2A A
•
MATERIAL: PLASTIC, POLYETHYLENE (PP)
•
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 0.750-16 UNF
•
INSIDE DIAMETER LENGTH: 0.625 INCHES NOMINAL IN
•
ROUND CAP OUTSIDE SURFACE CONDITION: RIBBED
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS
DESIGN TYPETHREADED
OVERALL DIAMETER0.812 INCHES NOMINAL IN
THREAD CLASS2A A
MATERIALPLASTIC, POLYETHYLENE (PP)
THREAD SIZE AND SERIES/TYPE DESIGNATOR0.750-16 UNF
INSIDE DIAMETER LENGTH0.625 INCHES NOMINAL IN
ROUND CAP OUTSIDE SURFACE CONDITIONRIBBED
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy TC8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TC8?
TC8 is a CABLE ASSEMBLY,SPECIAL PURPOSE,E manufactured by Brother. It is classified as a MRO (MRO_GENERAL).
What is the NSN for TC8?
TC8 is cataloged in the U.S. Government catalog under NSN 5340-00-917-5886. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TC8

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.