PartsTable
Technical Data Sheet
PartsTable / COMPONENT / TC15
TC15 ✓ Verified by PartsTable
Hoover · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

STRAP,TIE DOWN,ELECTRICAL COMPON. Key specifications include shape: STRAIGHT, width: 0.184 INCHES NOMINAL IN, length: 2.000 INCHES NOMINAL IN, diameter: 0.250 INCHES NOMINAL IN, material: TUNGSTEN CARBIDE, mounting_shank: INCLUDED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-366-2243, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TC15
NSN: 5330-00-366-2243
FSC: 5330
CAGE: 43491 — GENERAL SIGNAL CORP (USA)
SPECIFICATIONS
shapeSTRAIGHT
width0.184 INCHES NOMINAL IN
length2.000 INCHES NOMINAL IN
diameter0.250 INCHES NOMINAL IN
materialTUNGSTEN CARBIDE
mounting_shankINCLUDED
overall_diameter0.500 INCHES NOMINAL IN
special_featuresBUNDLE DIA 0.062/1.750 IN.;50 LB MIN HOLDING TS;TWIST-LOCK;N0.10 SCREW MTG HOLE SIZE LBS
style_designatorBALL SHAPE
removability_featureNOT INCLUDED
shank_overall_length2.500 INCHES NOMINAL IN
cutter_tooth_cut_styleMEDIUM
NSN5330-00-366-2243
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: TC15 MFR: Hoover ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SUPPLEMENTARY FEATURES: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
SUPPLEMENTARY FEATURESCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
80741Interchangeable
interchangeable cross-reference
interchangeable
65821BInterchangeable
interchangeable cross-reference
interchangeable
TC15Interchangeable
interchangeable cross-reference
interchangeable
AS40178Interchangeable
interchangeable cross-reference
interchangeable
32Z7Interchangeable
interchangeable cross-reference
interchangeable
D-141Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy TC15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TC15?
TC15 is a STRAP,TIE DOWN,ELECTRICAL COMPON manufactured by Hoover.
What parts can replace TC15?
There are 10 known substitutes for TC15: 80741, 65821B, TC15 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for TC15?
TC15 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-366-2243. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TC15

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026