PartsTable
Technical Data Sheet
PartsTable / COMPONENT / TC118-2
TC118-2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PLATE,MOUNTING is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYAMIDE NYLON, thickness: 0.125 INCHES NOMINAL IN, special_features: 0.750 IN. O/A LG;0.509 IN.

PIN LG;0.500 IN. O/A W;COLOR BLUE IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-840-0013, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TC118-2
NSN: 5340-00-840-0013
FSC: 5340
CAGE: 56501 — ABB INSTALLATION PRODUCTS INC (USA)
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON
thickness0.125 INCHES NOMINAL IN
special_features0.750 IN. O/A LG;0.509 IN. PIN LG;0.500 IN. O/A W;COLOR BLUE IN
NSN5340-00-840-0013
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: TC118-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC POLYAMIDE NYLON
•
THICKNESS: 0.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC POLYAMIDE NYLON
THICKNESS0.125 INCHES NOMINAL IN
SPECIAL FEATURES0.750 IN. O/A LG;0.509 IN. PIN LG;0.500 IN. O/A W;COLOR BLUE IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
510B005Interchangeable
interchangeable cross-reference
interchangeable
510-005-1Interchangeable
interchangeable cross-reference
interchangeable
266C111Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy TC118-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TC118-2?
TC118-2 is a PLATE,MOUNTING.
What parts can replace TC118-2?
There are 3 known substitutes for TC118-2: 510B005, 510-005-1, 266C111. Substitute compatibility should be verified for your specific system.
What is the NSN for TC118-2?
TC118-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-840-0013. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TC118-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026