PartsTable
Technical Data Sheet
PartsTable / COMPONENT / TB114
TB114 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: RUBBER CHLOROPRENE CLASS CR BODY, cone_width: 0.7710 INCHES NOMINAL IN, bore_diameter: 1.2500 INCHES NOMINAL IN, performance_type: STANDARD CAPACITY, style_designator: NORMAL ANGLE, belt_coupling_type: COUPLING. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-142-4355, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TB114
NSN: 3110-00-142-4355
FSC: 3110
CAGE: 90293 — BAUGHMAN MFG CO (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR BODY
cone_width0.7710 INCHES NOMINAL IN
bore_diameter1.2500 INCHES NOMINAL IN
performance_typeSTANDARD CAPACITY
style_designatorNORMAL ANGLE
belt_coupling_typeCOUPLING
cone_corner_radius0.1406 INCHES NOMINAL IN
strengthening_featureSYNTHETIC CORD
end_item_identificationPLYMOUTH 1987
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-142-4355
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: TB114 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
BORE DIAMETER: 1.2500 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
CONE WIDTH: 0.7710 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
BORE DIAMETER1.2500 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
CONE WIDTH0.7710 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
583-7Interchangeable
interchangeable cross-reference
interchangeable
T76Z6570REV24PT30Interchangeable
interchangeable cross-reference
interchangeable
7606570-30Interchangeable
interchangeable cross-reference
interchangeable
DMS 84047BInterchangeable
interchangeable cross-reference
interchangeable
MIL-E-1/602Interchangeable
interchangeable cross-reference
interchangeable
1008895-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy TB114?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TB114?
TB114 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace TB114?
There are 24 known substitutes for TB114: 583-7, T76Z6570REV24PT30, 7606570-30 and 21 more. Substitute compatibility should be verified for your specific system.
Is TB114 still available?
TB114 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TB114

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026