PartsTable
Technical Data Sheet
PartsTable / COMPONENT / TARSS29-36-35
TARSS29-36-35 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: PLASTIC PHENOLIC RETAINER, bore_diameter: 1.8052 INCHES NOMINAL IN, overall_width: 1.6300 INCHES NOMINAL IN, surface_finish: GROUND, lubrication_material: GREASE, overall_outside_diameter: 2.3125 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-809-6291, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TARSS29-36-35
NSN: 3110-00-809-6291
FSC: 3110
CAGE: 78118 — MPB CORPORATION DBA MPB CORP (USA)
SPECIFICATIONS
materialPLASTIC PHENOLIC RETAINER
bore_diameter1.8052 INCHES NOMINAL IN
overall_width1.6300 INCHES NOMINAL IN
surface_finishGROUND
shield_quantity2
lubrication_materialGREASE
overall_outside_diameter2.3125 INCHES NOMINAL IN
retainer_fabrication_methodMACHINED
standard_tolerance_designationABEC NO.7
lubrication_material_document_and_classificationMIL-G-15793 MIL SPEC SINGLE MATERIAL RESPONSE
NSN3110-00-809-6291
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: TARSS29-36-35 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 1.8052 INCHES NOMINAL IN
•
OVERALL OUTSIDE DIAMETER: 2.3125 INCHES NOMINAL IN
•
SHIELD QUANTITY: 2
•
SURFACE FINISH: GROUND
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.7
•
LUBRICATION MATERIAL: GREASE
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-15793 MIL SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH1.6300 INCHES NOMINAL IN
BORE DIAMETER1.8052 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER2.3125 INCHES NOMINAL IN
SHIELD QUANTITY2
SURFACE FINISHGROUND
STANDARD TOLERANCE DESIGNATIONABEC NO.7
LUBRICATION MATERIALGREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-15793 MIL SPEC SINGLE MATERIAL RESPONSE
RETAINER FABRICATION METHODMACHINED
MATERIALSTEEL BALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
43-3-8Interchangeable
interchangeable cross-reference
interchangeable
842AInterchangeable
interchangeable cross-reference
interchangeable
4L420Interchangeable
interchangeable cross-reference
interchangeable
FA42Interchangeable
interchangeable cross-reference
interchangeable
1801594-29Interchangeable
interchangeable cross-reference
interchangeable
10114947Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy TARSS29-36-35?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TARSS29-36-35?
TARSS29-36-35 is a BEARING,BALL,ANNULAR.
What parts can replace TARSS29-36-35?
There are 13 known substitutes for TARSS29-36-35: 43-3-8, 842A, 4L420 and 10 more. Substitute compatibility should be verified for your specific system.
Is TARSS29-36-35 still available?
TARSS29-36-35 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TARSS29-36-35

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026