PartsTable
Technical Data Sheet

TABLE42, D3/8IN — RESISTOR,VARIABLE,WIRE WOUND,PRE

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

TABLE42, D3/8IN: RESISTOR,VARIABLE,WIRE WOUND,PRE.

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include diameter: 0.375 INCHES NOMINAL IN, material: STEEL, cut_length: 0.750 INCHES NOMINAL IN, shank_type: WELDON, design_form: SINGLE END, flute_design: HELICAL. This part is cataloged in the U.S.

Government catalog under NSN 3455-01-167-4206, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TABLE42, D3/8IN
NSN: 3455-01-167-4206
FSC: 3455 — Cutting Tools for Machine Tools
CAGE: 05047 — THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS (USA)
SPECIFICATIONS
diameter0.375 INCHES NOMINAL IN
materialSTEEL
cut_length0.750 INCHES NOMINAL IN
shank_typeWELDON
design_formSINGLE END
flute_designHELICAL
flute_quantity2
overall_length2.500 INCHES NOMINAL IN
shank_diameter0.375 INCHES NOMINAL IN
helix_directionRIGHT-HAND
features_providedBALL END
cutting_rotation_directionRIGHT-HAND
NSN3455-01-167-4206
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,PRE TITLE COMPONENT PN TABLE42, D3/8IN MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
SHANK DIAMETER: 0.375 INCHES NOMINAL IN
•
FLUTE DESIGN: HELICAL
•
HELIX DIRECTION: RIGHT-HAND
•
DESIGN FORM: SINGLE END
•
SHANK TYPE: WELDON
•
CUT LENGTH: 0.750 INCHES NOMINAL IN
•
DIAMETER: 0.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.375 INCHES NOMINAL IN
FLUTE DESIGNHELICAL
HELIX DIRECTIONRIGHT-HAND
DESIGN FORMSINGLE END
SHANK TYPEWELDON
CUT LENGTH0.750 INCHES NOMINAL IN
DIAMETER0.375 INCHES NOMINAL IN
OVERALL LENGTH2.500 INCHES NOMINAL IN
CUTTING ROTATION DIRECTIONRIGHT-HAND
FEATURES PROVIDEDBALL END
SUBSTITUTES & CROSS-REFERENCES 3
42653Reference document
Same NSN cross-reference
Reference document — Secondary reference
ASME B94.19Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
B94.19 TABLE 45, 3/8 CUT DIA.Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy TABLE42, D3/8IN?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TABLE42, D3/8IN?
TABLE42, D3/8IN is a RESISTOR,VARIABLE,WIRE WOUND,PRE.
What parts can replace TABLE42, D3/8IN?
There are 3 known substitutes for TABLE42, D3/8IN: 42653, ASME B94.19, B94.19 TABLE 45, 3/8 CUT DIA.. Substitute compatibility should be verified for your specific system.
What is the NSN for TABLE42, D3/8IN?
TABLE42, D3/8IN is cataloged in the U.S. Government catalog under NSN 3455-01-167-4206. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TABLE42, D3/8IN

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.