PartsTable
Technical Data Sheet
Download PDF

TABLE1AND3100R1 — HOSE ASSEMBLY,NONMETALLIC

✓ Government record, cited
— · PIPE SECTION
PRODUCT OVERVIEW

TABLE1AND3100R1: HOSE ASSEMBLY,NONMETALLIC.

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 30.0 DEGREES SECOND END, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 2B FIRST END, connection_type: THREADED EXTERNAL PIPE SECOND END, inside_diameter: 0.250 INCHES NOMINAL IN, connection_style: INVERTED FLARE SECOND END. This part is cataloged in the U.S.

Government catalog under NSN 4720-00-629-5082, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TABLE1AND3100R1
NSN: 4720-00-629-5082
NIINs: 006295082, 006306710
FSC: 4720 — Hose and Flexible Tubing
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
seat_angle30.0 DEGREES SECOND END
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class2B FIRST END
connection_typeTHREADED EXTERNAL PIPE SECOND END
inside_diameter0.250 INCHES NOMINAL IN
connection_styleINVERTED FLARE SECOND END
outside_diameter0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
thread_directionRIGHT-HAND SECOND END
operating_pressure2750.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure11000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size0.250 INCHES SECOND END IN
end_connection_designSTRAIGHT FIRST END
NSN4720-00-629-5082
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: TABLE1AND3100R1 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
SUBSTITUTES & CROSS-REFERENCES 3
130943Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
105971Reference document
Same NSN cross-reference
Reference document — Secondary reference
F4210606-6-8-6-79.00Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy TABLE1AND3100R1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TABLE1AND3100R1?
TABLE1AND3100R1 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace TABLE1AND3100R1?
There are 3 known substitutes for TABLE1AND3100R1: 130943, 105971, F4210606-6-8-6-79.00. Substitute compatibility should be verified for your specific system.
What is the NSN for TABLE1AND3100R1?
TABLE1AND3100R1 is cataloged in the U.S. Government catalog under NSN 4720-00-629-5082. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TABLE1AND3100R1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.