PartsTable
Technical Data Sheet

TABLE 17,D2 3/4IN — CUTTER,MILLING,SHELL END

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

TABLE 17,D2 3/4IN: CUTTER,MILLING,SHELL END.

The CUTTER,MILLING,SHELL END is a the manufacturer industrial component. Key specifications include material: STEEL, face_width: 1.625 INCHES NOMINAL IN, tooth_type: INTEGRAL, outside_diameter: 2.750 INCHES NOMINAL IN, mounting_hole_diameter: 1.000 INCHES NOMINAL IN, cutting_side_designation: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 3455-00-289-8370, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TABLE 17,D2 3/4IN
NSN: 3455-00-289-8370
FSC: 3455 — Cutting Tools for Machine Tools
CAGE: 05047 — THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS (USA)
SPECIFICATIONS
materialSTEEL
face_width1.625 INCHES NOMINAL IN
tooth_typeINTEGRAL
outside_diameter2.750 INCHES NOMINAL IN
mounting_hole_diameter1.000 INCHES NOMINAL IN
cutting_side_designationRIGHT-HAND
specification/standard_data80204-B94.19 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NSN3455-00-289-8370
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available CUTTER,MILLING,SHELL END TITLE COMPONENT PN TABLE 17,D2 3/4IN MFR CUTTER,MILLING,SHELL E
KEY FEATURES
•
MOUNTING HOLE DIAMETER: 1.000 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 2.750 INCHES NOMINAL IN
•
TOOTH TYPE: INTEGRAL
•
SPECIFICATION/STANDARD DATA: 80204-B94.19 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
CUTTING SIDE DESIGNATION: RIGHT-HAND
•
MATERIAL: STEEL
•
FACE WIDTH: 1.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE DIAMETER1.000 INCHES NOMINAL IN
OUTSIDE DIAMETER2.750 INCHES NOMINAL IN
TOOTH TYPEINTEGRAL
SPECIFICATION/STANDARD DATA80204-B94.19 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
CUTTING SIDE DESIGNATIONRIGHT-HAND
MATERIALSTEEL
FACE WIDTH1.625 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 8
B94.19 TABLE 19Reference document
Same NSN cross-reference
Reference document — Secondary reference
S275-7Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS15716-13Reference document
Same NSN cross-reference
Reference document — Secondary reference
54131Reference document
Same NSN cross-reference
Reference document — Secondary reference
826Reference document
Same NSN cross-reference
Reference document — Secondary reference
NL703RSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy TABLE 17,D2 3/4IN?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TABLE 17,D2 3/4IN?
TABLE 17,D2 3/4IN is a CUTTER,MILLING,SHELL END.
What parts can replace TABLE 17,D2 3/4IN?
There are 8 known substitutes for TABLE 17,D2 3/4IN: B94.19 TABLE 19, S275-7, MS15716-13 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for TABLE 17,D2 3/4IN?
TABLE 17,D2 3/4IN is cataloged in the U.S. Government catalog under NSN 3455-00-289-8370. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TABLE 17,D2 3/4IN