PartsTable
Technical Data Sheet
PartsTable / COMPONENT / TAB6-10-50
TAB6-10-50 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 BALL, bore_shape: STRAIGHT, flange_width: 0.0380 INCHES MINIMUM AND 0.0420 INCHES MAXIMUM IN, bore_diameter: 0.3748 INCHES MINIMUM AND 0.3752 INCHES MAXIMUM IN, contact_angle: 25.0 DEGREES MAXIMUM, overall_width: 0.1510 INCHES MINIMUM AND 0.1560 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-495-3052, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TAB6-10-50
NSN: 3110-00-495-3052
FSC: 3110
CAGE: 78118 — MPB CORPORATION DBA MPB CORP (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 BALL
bore_shapeSTRAIGHT
flange_width0.0380 INCHES MINIMUM AND 0.0420 INCHES MAXIMUM IN
bore_diameter0.3748 INCHES MINIMUM AND 0.3752 INCHES MAXIMUM IN
contact_angle25.0 DEGREES MAXIMUM
overall_width0.1510 INCHES MINIMUM AND 0.1560 INCHES MAXIMUM IN
load_directionANGULAR
surface_finishGROUND
style_designatorCOUNTERBORED OUTER RING, NON-SEPARABLE
internal_clearance0.0003 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
flange_outside_diameter0.6820 INCHES MINIMUM AND 0.6920 INCHES MAXIMUM IN
outer_ring_outside_diameter0.6240 INCHES MINIMUM AND 0.6260 INCHES MAXIMUM IN
NSN3110-00-495-3052
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: TAB6-10-50 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE SHAPE: STRAIGHT
•
RETAINER FABRICATION METHOD: MACHINED
•
MATERIAL: STEEL COMP E52100 OUTER RACE
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, NON-SEPARABLE
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
BORE SHAPESTRAIGHT
RETAINER FABRICATION METHODMACHINED
MATERIALSTEEL COMP E52100 OUTER RACE
MATERIALSTEEL COMP E52100 BALL
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
MATERIALCOPPER ALLOY 932 RETAINER
MATERIALSTEEL COMP E52100 INNER RACE
SURFACE FINISHGROUND
INTERNAL CLEARANCE0.0003 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
LOAD DIRECTIONANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
5186723Interchangeable
interchangeable cross-reference
interchangeable
1760-323Interchangeable
interchangeable cross-reference
interchangeable
38466Interchangeable
interchangeable cross-reference
interchangeable
54322Interchangeable
interchangeable cross-reference
interchangeable
N54322Interchangeable
interchangeable cross-reference
interchangeable
19692NInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy TAB6-10-50?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TAB6-10-50?
TAB6-10-50 is a BEARING,BALL,ANNULAR.
What parts can replace TAB6-10-50?
There are 14 known substitutes for TAB6-10-50: 5186723, 1760-323, 38466 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for TAB6-10-50?
TAB6-10-50 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-495-3052. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TAB6-10-50

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026