PartsTable
Technical Data Sheet
PartsTable / COMPONENT / TA798D5
TA798D5 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.189 INCHES NOMINAL IN, material: RUBBER CUSHION, overall_width: 0.500 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, material_thickness: 0.040 INCHES NOMINAL IN, loop_inside_diameter: 0.313 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-141-6972, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TA798D5
NSN: 5340-00-141-6972
FSC: 5340
CAGE: 84971 — TA AEROSPACE CO DIV TA AEROSPACE (USA)
SPECIFICATIONS
diameter0.189 INCHES NOMINAL IN
materialRUBBER CUSHION
overall_width0.500 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
material_thickness0.040 INCHES NOMINAL IN
loop_inside_diameter0.313 INCHES NOMINAL IN
cushioning_environmental_protectionHYDRAULIC FLUID
material_document_and_classificationQQ-A-362 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.828 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.578 INCHES NOMINAL IN
NSN5340-00-141-6972
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: TA798D5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN
•
STYLE DESIGNATOR: OFFSET MOUNT
•
MATERIAL: RUBBER CUSHION
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-362 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
LOOP INSIDE DIAMETER: 0.313 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.828 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
STYLE DESIGNATOROFFSET MOUNT
MATERIALRUBBER CUSHION
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 2024 BAND
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-362 FED SPEC SINGLE MATERIAL RESPONSE BAND
LOOP INSIDE DIAMETER0.313 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.828 INCHES NOMINAL IN
DIAMETER0.189 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.578 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
540881Interchangeable
interchangeable cross-reference
interchangeable
70395Interchangeable
interchangeable cross-reference
interchangeable
80048Interchangeable
interchangeable cross-reference
interchangeable
4657-1571Interchangeable
interchangeable cross-reference
interchangeable
TA798-5Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy TA798D5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TA798D5?
TA798D5 is a CLAMP,LOOP.
What parts can replace TA798D5?
There are 5 known substitutes for TA798D5: 540881, 70395, 80048 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for TA798D5?
TA798D5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-141-6972. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TA798D5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026