PartsTable
Technical Data Sheet
PartsTable / COMPONENT / TA731-D46
TA731-D46 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 BAND, overall_width: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, style_designator: CENTER MOUNT, material_thickness: 0.054 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN, loop_inside_diameter: 2.865 INCHES MINIMUM AND 2.885 INCHES MAXIMUM IN, material_document_and_classification: QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-059-7101, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TA731-D46
NSN: 5340-01-059-7101
FSC: 5340
CAGE: 84971 — TA AEROSPACE CO DIV TA AEROSPACE (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 BAND
overall_width0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
style_designatorCENTER MOUNT
material_thickness0.054 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN
loop_inside_diameter2.865 INCHES MINIMUM AND 2.885 INCHES MAXIMUM IN
material_document_and_classificationQQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end2.276 INCHES MINIMUM AND 2.296 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole1.901 INCHES MINIMUM AND 1.921 INCHES MAXIMUM IN
NSN5340-01-059-7101
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: TA731-D46 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.054 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN
•
MATERIAL: ALUMINUM ALLOY 2024 BAND
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.901 INCHES MINIMUM AND 1.921 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CENTER MOUNT
•
LOOP INSIDE DIAMETER: 2.865 INCHES MINIMUM AND 2.885 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 2.276 INCHES MINIMUM AND 2.296 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.054 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN
MATERIALALUMINUM ALLOY 2024 BAND
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.901 INCHES MINIMUM AND 1.921 INCHES MAXIMUM IN
STYLE DESIGNATORCENTER MOUNT
OVERALL WIDTH0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
LOOP INSIDE DIAMETER2.865 INCHES MINIMUM AND 2.885 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END2.276 INCHES MINIMUM AND 2.296 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
23008Interchangeable
interchangeable cross-reference
interchangeable
30074-1Interchangeable
interchangeable cross-reference
interchangeable
995QY-0525Interchangeable
interchangeable cross-reference
interchangeable
533101E-525-ZAInterchangeable
interchangeable cross-reference
interchangeable
4404C525MInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy TA731-D46?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TA731-D46?
TA731-D46 is a CLAMP,LOOP.
What parts can replace TA731-D46?
There are 5 known substitutes for TA731-D46: 23008, 30074-1, 995QY-0525 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for TA731-D46?
TA731-D46 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-059-7101. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TA731-D46

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026