PartsTable
Technical Data Sheet
Download PDF

TA520WD25-25 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

TA520WD25-25: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: ALUMINUM ALLOY 2024 BAND, loop_width: 1.557 INCHES MINIMUM AND 1.567 INCHES MAXIMUM IN, loop_length: 1.557 INCHES MINIMUM AND 1.567 INCHES MAXIMUM IN, overall_width: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN, style_designator: RECTANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-119-1847, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TA520WD25-25
NSN: 5340-00-119-1847
FSC: 5340 — Hardware, Commercial
CAGE: 83483 — THOMAS ASSOCIATES (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialALUMINUM ALLOY 2024 BAND
loop_width1.557 INCHES MINIMUM AND 1.567 INCHES MAXIMUM IN
loop_length1.557 INCHES MINIMUM AND 1.567 INCHES MAXIMUM IN
overall_width0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
style_designatorRECTANGULAR
material_thickness0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN
distance_from_loop_center_to_tongue_end1.484 INCHES MINIMUM AND 1.494 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole1.266 INCHES MINIMUM AND 1.276 INCHES MAXIMUM IN
NSN5340-00-119-1847
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: TA520WD25-25 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP WIDTH: 1.557 INCHES MINIMUM AND 1.567 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: RECTANGULAR
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.484 INCHES MINIMUM AND 1.494 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.266 INCHES MINIMUM AND 1.276 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC CUSHION
TECHNICAL CHARACTERISTICS
LOOP WIDTH1.557 INCHES MINIMUM AND 1.567 INCHES MAXIMUM IN
STYLE DESIGNATORRECTANGULAR
DIAMETER0.204 INCHES NOMINAL IN
OVERALL WIDTH0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
MATERIAL THICKNESS0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.484 INCHES MINIMUM AND 1.494 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.266 INCHES MINIMUM AND 1.276 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC CUSHION
MATERIALALUMINUM ALLOY 2024 BAND
LOOP LENGTH1.557 INCHES MINIMUM AND 1.567 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 4
497WD25-25Reference document
Same NSN cross-reference
Reference document — Secondary reference
10086633Reference document
Same NSN cross-reference
Reference document — Informative reference only
JM44RC2WD25-25Reference document
Same NSN cross-reference
Reference document — Secondary reference
13029973Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy TA520WD25-25?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TA520WD25-25?
TA520WD25-25 is a CLAMP,LOOP.
What parts can replace TA520WD25-25?
There are 4 known substitutes for TA520WD25-25: 497WD25-25, 10086633, JM44RC2WD25-25 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for TA520WD25-25?
TA520WD25-25 is cataloged in the U.S. Government catalog under NSN 5340-00-119-1847. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TA520WD25-25

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.