PartsTable
Technical Data Sheet
Download PDF

TA519D10-21HR — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

TA519D10-21HR: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: ALUMINUM ALLOY 2024 BAND, loop_width: 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN, loop_length: 1.297 INCHES MINIMUM AND 1.327 INCHES MAXIMUM IN, overall_width: 0.500 INCHES NOMINAL IN, style_designator: RECTANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-126-7480, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TA519D10-21HR
NSN: 5340-00-126-7480
FSC: 5340 — Hardware, Commercial
CAGE: 84971 — TA AEROSPACE CO DIV TA AEROSPACE (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialALUMINUM ALLOY 2024 BAND
loop_width0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
loop_length1.297 INCHES MINIMUM AND 1.327 INCHES MAXIMUM IN
overall_width0.500 INCHES NOMINAL IN
style_designatorRECTANGULAR
material_thickness0.032 INCHES NOMINAL IN
specification/standard_data80205-NAS1712 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
cushioning_environmental_protectionHEAT AND OIL RESISTANT AND WEATHER RESISTANT
material_document_and_classificationAMS 3303 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
distance_from_loop_center_to_tongue_end1.247 INCHES MINIMUM AND 1.307 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole1.028 INCHES MINIMUM AND 1.088 INCHES MAXIMUM IN
NSN5340-00-126-7480
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: TA519D10-21HR MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUSHIONING ENVIRONMENTAL PROTECTION: HEAT AND OIL RESISTANT AND WEATHER RESISTANT
•
LOOP WIDTH: 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: RECTANGULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3303 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CUSHIONING ENVIRONMENTAL PROTECTIONHEAT AND OIL RESISTANT AND WEATHER RESISTANT
LOOP WIDTH0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
STYLE DESIGNATORRECTANGULAR
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3303 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5,T4 OR T42 FED SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER0.204 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.247 INCHES MINIMUM AND 1.307 INCHES MAXIMUM IN
SPECIFICATION/STANDARD DATA80205-NAS1712 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 3
S147LD10-21HRSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
NAS1712Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
TA11C80D10-21HRSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy TA519D10-21HR?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TA519D10-21HR?
TA519D10-21HR is a CLAMP,LOOP.
What parts can replace TA519D10-21HR?
There are 3 known substitutes for TA519D10-21HR: S147LD10-21HR, NAS1712, TA11C80D10-21HR. Substitute compatibility should be verified for your specific system.
What is the NSN for TA519D10-21HR?
TA519D10-21HR is cataloged in the U.S. Government catalog under NSN 5340-00-126-7480. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TA519D10-21HR

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.