The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.278 INCHES MINIMUM AND 0.282 INCHES MAXIMUM IN, material: STEEL COMP 321 BAND, lug_width: 1.000 INCHES NOMINAL IN, overall_width: 0.625 INCHES NOMINAL IN, style_designator: RIGHT HAND CLAMP & BRACKET, lug_hole_diameter: 0.127 INCHES NOMINAL IN. This part is cataloged in the U.S.
Government catalog under NSN 5340-00-135-9676, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
TA2D713H2
NSN:5340-00-135-9676 FSC:5340 — Hardware, Commercial CAGE:84971 — TA AEROSPACE CO DIV TA AEROSPACE (USA)
SPECIFICATIONS
diameter
0.278 INCHES MINIMUM AND 0.282 INCHES MAXIMUM IN
material
STEEL COMP 321 BAND
lug_width
1.000 INCHES NOMINAL IN
overall_width
0.625 INCHES NOMINAL IN
style_designator
RIGHT HAND CLAMP & BRACKET
lug_hole_diameter
0.127 INCHES NOMINAL IN
surface_treatment
PASSIVATE BAND
material_thickness
0.032 INCHES NOMINAL IN
loop_inside_diameter
0.750 INCHES NOMINAL IN
specification/standard_data
26512-GC500T MANUFACTURERS SPECIFICATION
material_document_and_classification
AMS5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end
0.885 INCHES NOMINAL IN
NSN
5340-00-135-9676
COMPONENT DIAGRAM
KEY FEATURES
•
LUG HOLE DIAMETER: 0.127 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE: 1.064 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RIGHT HAND CLAMP & BRACKET
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.278 INCHES MINIMUM AND 0.282 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
LUG WIDTH: 1.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LUG HOLE DIAMETER
0.127 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE
1.064 INCHES NOMINAL IN
STYLE DESIGNATOR
RIGHT HAND CLAMP & BRACKET
MATERIAL DOCUMENT AND CLASSIFICATION
AMS5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
DIAMETER
0.278 INCHES MINIMUM AND 0.282 INCHES MAXIMUM IN
OVERALL WIDTH
0.625 INCHES NOMINAL IN
MATERIAL THICKNESS
0.032 INCHES NOMINAL IN
LUG WIDTH
1.000 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END
0.885 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA
26512-GC500T MANUFACTURERS SPECIFICATION
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TA2D713H2?
TA2D713H2 is a CLAMP,LOOP.
What parts can replace TA2D713H2?
There is 1 known substitute for TA2D713H2: TA2D713H12. Substitute compatibility should be verified for your specific system.
What is the NSN for TA2D713H2?
TA2D713H2 is cataloged in the U.S. Government catalog under NSN 5340-00-135-9676. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.