PartsTable
Technical Data Sheet
PartsTable / COMPONENT / TA1720HO15HR
TA1720HO15HR ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: STEEL COMP 321 BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, surface_treatment: PASSIVATE BAND, material_thickness: 0.032 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-052-4020, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TA1720HO15HR
NSN: 5340-00-052-4020
FSC: 5340
CAGE: 84971 — TA AEROSPACE CO DIV TA AEROSPACE (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialSTEEL COMP 321 BAND
overall_width0.500 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
surface_treatmentPASSIVATE BAND
material_thickness0.032 INCHES NOMINAL IN
loop_inside_diameter0.938 INCHES NOMINAL IN
cushioning_environmental_protectionCORROSION RESISTANT AND WEATHER RESISTANT AND OIL RESISTANT
material_document_and_classificationAMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.138 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.920 INCHES NOMINAL IN
NSN5340-00-052-4020
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: TA1720HO15HR MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3303 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
•
MATERIAL: RUBBER SILICONE CLASS Q CUSHION
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
STYLE DESIGNATOR: OFFSET MOUNT
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.920 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.938 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3303 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
MATERIALRUBBER SILICONE CLASS Q CUSHION
DIAMETER0.204 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
STYLE DESIGNATOROFFSET MOUNT
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.920 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.938 INCHES NOMINAL IN
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
CUSHIONING ENVIRONMENTAL PROTECTIONCORROSION RESISTANT AND WEATHER RESISTANT AND OIL RESISTANT
SURFACE TREATMENTPASSIVATE BAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
361-2-15Upgraded Successor
successor cross-reference
successor
TA8C25H15Upgraded Successor
successor cross-reference
successor
S975-2-15Upgraded Successor
successor cross-reference
successor
46715Interchangeable
interchangeable cross-reference
interchangeable
307897Interchangeable
interchangeable cross-reference
interchangeable
18345Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy TA1720HO15HR?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TA1720HO15HR?
TA1720HO15HR is a CLAMP,LOOP.
What parts can replace TA1720HO15HR?
There are 11 known substitutes for TA1720HO15HR: 361-2-15, TA8C25H15, S975-2-15 and 8 more. Substitute compatibility should be verified for your specific system.
Is TA1720HO15HR still available?
TA1720HO15HR is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TA1720HO15HR

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026