PartsTable
Technical Data Sheet
PartsTable / COMPONENT / TA1720H5FG
TA1720H5FG ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: GLASS FIBER CUSHION, overall_width: 0.375 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.020 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-663-1971, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TA1720H5FG
NSN: 5340-00-663-1971
FSC: 5340
CAGE: 84971 — TA AEROSPACE CO DIV TA AEROSPACE (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialGLASS FIBER CUSHION
overall_width0.375 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
material_thickness0.020 INCHES NOMINAL IN
loop_inside_diameter0.298 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
cushioning_environmental_protectionHEAT
material_document_and_classificationMIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.724 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.521 INCHES MINIMUM AND 0.551 INCHES MAXIMUM IN
NSN5340-00-663-1971
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: TA1720H5FG MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL CORROSION RESISTING BAND
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.724 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.298 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.020 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.204 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL CORROSION RESISTING BAND
DISTANCE FROM LOOP CENTER TO TONGUE END0.724 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.298 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
MATERIALGLASS FIBER CUSHION
OVERALL WIDTH0.375 INCHES NOMINAL IN
MATERIAL THICKNESS0.020 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER0.204 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
STYLE DESIGNATOROFFSET MOUNT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
JM43LC5H5FGUpgraded Successor
successor cross-reference
successor
TA1716H5FGUpgraded Successor
successor cross-reference
successor
9M145-5Upgraded Successor
successor cross-reference
successor
380-10002-3Interchangeable
interchangeable cross-reference
interchangeable
1000689-03Interchangeable
interchangeable cross-reference
interchangeable
4715Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy TA1720H5FG?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TA1720H5FG?
TA1720H5FG is a CLAMP,LOOP.
What parts can replace TA1720H5FG?
There are 19 known substitutes for TA1720H5FG: JM43LC5H5FG, TA1716H5FG, 9M145-5 and 16 more. Substitute compatibility should be verified for your specific system.
Is TA1720H5FG still available?
TA1720H5FG is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TA1720H5FG

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026