PartsTable
Technical Data Sheet
PartsTable / COMPONENT / TA1720H16HR
TA1720H16HR ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: STEEL COMP 321 BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: PASSIVATE BAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-988-5921, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TA1720H16HR
NSN: 5340-00-988-5921
FSC: 5340
CAGE: 84971 — TA AEROSPACE CO DIV TA AEROSPACE (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialSTEEL COMP 321 BAND
overall_width0.500 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
surface_treatmentPASSIVATE BAND
material_thickness0.032 INCHES NOMINAL IN
loop_inside_diameter1.000 INCHES NOMINAL IN
cushioning_environmental_protectionCORROSION RESISTANT AND WEATHER RESISTANT AND OIL RESISTANT
material_document_and_classificationAMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.169 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.951 INCHES NOMINAL IN
NSN5340-00-988-5921
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: TA1720H16HR MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUSHIONING ENVIRONMENTAL PROTECTION: CORROSION RESISTANT AND WEATHER RESISTANT AND OIL RESISTANT
•
STYLE DESIGNATOR: OFFSET MOUNT
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 321 BAND
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3303 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
•
SURFACE TREATMENT: PASSIVATE BAND
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CUSHIONING ENVIRONMENTAL PROTECTIONCORROSION RESISTANT AND WEATHER RESISTANT AND OIL RESISTANT
STYLE DESIGNATOROFFSET MOUNT
DIAMETER0.204 INCHES NOMINAL IN
MATERIALSTEEL COMP 321 BAND
MATERIALRUBBER SILICONE CLASS Q CUSHION
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3303 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
SURFACE TREATMENTPASSIVATE BAND
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
46716Upgraded Successor
successor cross-reference
successor
46716-15Upgraded Successor
successor cross-reference
successor
2013 46Interchangeable
interchangeable cross-reference
interchangeable
550 46Interchangeable
interchangeable cross-reference
interchangeable
TA1720H016HRInterchangeable
Same NIIN cross-reference
interchangeable
45D5H16Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy TA1720H16HR?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TA1720H16HR?
TA1720H16HR is a CLAMP,LOOP.
What parts can replace TA1720H16HR?
There are 6 known substitutes for TA1720H16HR: 46716, 46716-15, 2013 46 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for TA1720H16HR?
TA1720H16HR is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-988-5921. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TA1720H16HR

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026