PartsTable
Technical Data Sheet
PartsTable / COMPONENT / TA1716SS13FG
TA1716SS13FG ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: STEEL COMP 302 BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.051 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-291-5329, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
TA1716SS13FG
NSN: 5340-00-291-5329
FSC: 5340
CAGE: 84971 — TA AEROSPACE CO DIV TA AEROSPACE (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialSTEEL COMP 302 BAND
overall_width0.500 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
material_thickness0.051 INCHES NOMINAL IN
loop_inside_diameter0.798 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN
material_document_and_classificationMIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.1142 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.881 INCHES MINIMUM AND 0.911 INCHES MAXIMUM IN
NSN5340-00-291-5329
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: TA1716SS13FG MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 302 BAND
•
STYLE DESIGNATOR: OFFSET MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE BAND
•
MATERIAL THICKNESS: 0.051 INCHES NOMINAL IN
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.798 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.881 INCHES MINIMUM AND 0.911 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 302 BAND
STYLE DESIGNATOROFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE BAND
MATERIAL THICKNESS0.051 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
DIAMETER0.204 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.798 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.881 INCHES MINIMUM AND 0.911 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.1142 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
47-113Interchangeable
interchangeable cross-reference
interchangeable
7J6545Interchangeable
interchangeable cross-reference
interchangeable
407128Interchangeable
interchangeable cross-reference
interchangeable
IPLM13CInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy TA1716SS13FG?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is TA1716SS13FG?
TA1716SS13FG is a CLAMP,LOOP.
What parts can replace TA1716SS13FG?
There are 4 known substitutes for TA1716SS13FG: 47-113, 7J6545, 407128 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for TA1716SS13FG?
TA1716SS13FG is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-291-5329. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — TA1716SS13FG

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026